I've posted several euro version fpd files to the "files" section of the group. I followed the measurements set out on the www.doepfer.de website.
Go tothe Doepfer site and pick your language, then select the "Products" button on the left. Under the Analog A-100 Modular System, you'll see a list of links. Click on the "Mechanical Details" link and scroll down. They have a great diagram on where the holes should go and panel widths.
Email if you have a question. I've built three or four panels based on this and they fit perfectly.
David
Go tothe Doepfer site and pick your language, then select the "Products" button on the left. Under the Analog A-100 Modular System, you'll see a list of links. Click on the "Mechanical Details" link and scroll down. They have a great diagram on where the holes should go and panel widths.
Email if you have a question. I've built three or four panels based on this and they fit perfectly.
David
--- In ModularSynthPanels@yahoogroups.com, "b_rachielles" <brachielles@...> wrote:
>
> Howdy folks. I've noticed in the file section that the Euro selection is pretty anemic. Does anyone have any empty Euro panel FPD files, maybe in the 10-18 HP range that they could upload or email directly? I'm petrified that if I try to get the mounting hole locations correct on my own, that I'll screw up and end up with useless panels.
>
> Thanks a bunch.
>