One time I was building a module with the same hole pattern as a MOTM
panel I had replaced and had lying abandoned in my parts box. While
waiting for the FPD panel to arrive, I printed out and pasted the paper
design onto the MOTM panel and had a stand-in. It works because the
print format is full size.
Richard Brewster
http://pugix.com
Scott Juskiw wrote:
panel I had replaced and had lying abandoned in my parts box. While
waiting for the FPD panel to arrive, I printed out and pasted the paper
design onto the MOTM panel and had a stand-in. It works because the
print format is full size.
Richard Brewster
http://pugix.com
Scott Juskiw wrote:
> I've created an FPD file for my monitor/tuner utility module. I
> printed it out on paper and glued it to my plastic panel. It doesn't
> look too bad (as a temporary solution). Scroll to the bottom of this
> page to see some pictures:
>
> http://www.tellun.com/motm/diy/tln867/TLN-867.html
>
>