Modular Synth Panels

The picture in the sduck folder is of the first one of these I built, with the uncorrected jack placements, otherwise it's correct. The jack holes were maybe a millimeter too low - not something that was obvious visually but it made the fit into my cabinet a little tight. 

--- In ModularSynthPanels@yahoogroups.com, Jason Proctor <jason@...> wrote:
>
> thanks much.
> 
> is the picture in the photos section accurate? i can't currently get 
> my Parallels installation to work, so i can't fire up FPE to check 
> layout etc.
> 
> tx
> j
> 
> 
> >updated verson posted to files section in sduck panels
> >
> >--- In ModularSynthPanels@yahoogroups.com, "sduck409" <sduck409@> wrote:
> >>
> >>  Look in the sduck folder in the files section. 2u, fully featured, 
> >>not trad but you can easily modify it. Before ordering it give me a 
> >>chance to make sure I upped the revised version - I messed up the 
> >>position of the jacks on my first design of this, and revised it, 
> >>but don't remember if I ever posted the revision. I'll check that 
> >>this evening. There may be pictures of this one also in the 
> >>pictures section.
> >>
> >>  --- In ModularSynthPanels@yahoogroups.com, Jason Proctor <jason@> wrote:
> >>  >
> >>  > does anyone have a good FPD for a (2U, one presumes) MOTM format
> >>  > Bananalogue VCS?
> >>  >
> >>  > thanks much
> >>  >
> >>
> >
> >
> >
> >
> >------------------------------------
> >
> >Yahoo! Groups Links
> >
> >
> >
>