Modular Synth Panels

Hey there Scott - 

In the Tau, please consider including the second MOD FREQ LED - the one we left out of the current design because we thought a dual-color one could be used.  We ended up drilling an extra hole in the panel which was no sweat to do - especially 'cause we were already step-drilling the one existing hole to the larger, MOTM-standard size.

Ken's Sub Osc and Sequential Switch look fascinating.  We were pondering the Sub Osc about a week ago.  We'll take a closer look FWIW.

Will took a first pass at a JH Son of Storm Tide Flanger panel.  I still can't get the hang of how to post images up here so here's a URL to the design:

http://www.dragonflyalley.com/images/JHSOSTFlanger/JHSOSTFlangerV2vIIwidth2-56in.jpg

How's it look, guys?

And we're messing around with a design for JH's Paulie-Muug Resonator.

Bill (and Will)





--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> Naw, it's my responsibility to document any modifications, otherwise I  
> can't be surprised if they don't sell. I was pretty much designing  
> panels for myself in the beginning, I admit it.
> : )
> A few people have delved into those designs, but it's just not easy to  
> read my mind. It's written in crayon.
> 
> I'll bring the SubOsc and Seq Switch back, but as they're designed by  
> Ken.
> 
> The Tau Pipe, I should add, is changing. I'm going to take out the  
> output attenuators and 1V/ oct trim, and add the Color and Invert  
> switches.
> 
> Scott Deyo
> contact@...
> The Bridechamber
> www.bridechamber.com
> Jealous Edison Record Kompany
> www.jealousedison.com
> 
> 
> 
> 
> On Aug 26, 2009, at 9:09 AM, adaaxs wrote:
> 
> > This is sort of my fault. I could have helped Scott, I wasted enough  
> > time tossing opinions at him. Yet I was too lazy to sort out the  
> > changes on paper to make them better ( and these versions are  
> > better). Instead I just kept asking badly framed questions and  
> > complaining. Add to that that I said that I would help document the  
> > ones I was working on for ease of building and didn't deliver.
> >
> > The suboscillator, Tau Pipe and CGS Event sequencer all deserve the  
> > Will and Bill treatment . In their modified form they in particular  
> > are tremendous additions to any synth or studio.
> >
> > The fact that BC has to close these out is a shame and testament to  
> > what not sharing, not trying and procrastination gets you. You end  
> > up losing the good shit and you wonder why.
> >
> > Best
> >
> > Gino
> > >
> > > Hey all,
> > >
> > > Here's a little sale to get some panels out of here, and make room  
> > for
> > > all this new metal.
> > >
> > > I have some panels that incorporate mods, which are not popular, or
> > > have little mistakes in the screening ("ouput", etc.). All these  
> > will
> > > be redone without mods, but until then...
> > > 20% off the following panels --
> > > CGS Event Sequencer
> > > CGS SubOscillator
> > > Tau Pipe Phaser
> > > MFOS VCO
> > > MFOS ADSR
> > > MFOS VCLFO
> > > Tellun Gate ('A' and 'B' are switched! : (
> > > YuSynth FFB
> > >
> > >
> > > To order, email me, and I will make sure the panels are in stock,  
> > will
> > > put them aside, and then you can pay.
> > > Sale ends Sunday at midnight, at which point it will go online on  
> > the
> > > site with any panels that are left, at only 10% off.
> > >
> > > G'night!
> > > Scott Deyo
> > > contact@
> > > The Bridechamber
> > > www.bridechamber.com
> > > Jealous Edison Record Kompany
> > > www.jealousedison.com
> > >
> >
> >
> >
>