Peter told me he uses REAN pots, same knobs as Blacet modules. Other 6mm
D-shaft will work. The pots used are Panasonic(check the milton BOM)
Best regards,
Josue.
D-shaft will work. The pots used are Panasonic(check the milton BOM)
Best regards,
Josue.
----- Original Message -----
From: "Josue Arias" <josue@...>
To: <motmpanels@yahoogroups.com>
Sent: Tuesday, June 17, 2003 10:17 PM
Subject: Re: [motmpanels] Milton Panel (was: Re: -MOTM format panel
uploded-)
> > What size of knobs is intended to be used?
>
> I`ve followed the .8" spacing between pots centers, I just emailed Peter
> Granader about the knobs question. The pots are 9mm pcb mount so knobs
will
> have about .5" diameter.
> Thanks,
>
> Josue.
>
>
>
> To unsubscribe from this group, send an email to:
> motmpanels-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>