Modular Synth Panels

Hi Steve,

No worries on the content. The knobs you'll need are
the larger MOTM knobs and smaller ones for the inner
circle and corner pots. The center knob is a size up
from the MOTM standard knob.

I didn't know the Lumex LED's now cost $9! They were
only 2 each for the extra bright ones when I got them
I think.

Parts can be expensive, but don't skimp on your step
switch quality. You want these to last a while.
They'll take the brunt of the abuse when playing with
the module.

Thomas

--- Steve <steve@...> wrote:

> Forgive me if any of this is redundant or already
> answered.
>
> I'm looking to complete the front panel BOM for the
> Thomas White
> Rotary Klee MOTM panel soon in production by
> BrideChamber.
>
> After some quick emails with Thomas, I put together
> a PRELIMINARY BOM.
>
> His rotary design and the BOM is in the KleeRotary
> folder I just
> created here in the Files area.
>
> There are a few parts that I need help on- namely
> some of the toggles,
> and confirmation of whether the knobs should be the
> large MOTM size or
> the small ones. They are highlighted in yellow.
>
> I'm also going to probably substitute the $9 Lumex
> panel LEDs with a
> $.09 LED panel mount and a T1 standard LED to save
> about $175 on the
> build. Suggestions for proper T1 LEDs are welcome.
>
> Thomas- if you see this and find any of this content
> objectionable let
> me know and I'll remove it.
>
> Please let me know if you have any suggestions for
> the BOM so that I
> can complete it.
>
> Thanks in advance,
>
> Steve from Modularland.com
>
>
>

Thomas White
Natural Rhythm
www.naturalrhythmmusic.com