Forgive me if any of this is redundant or already answered.
I'm looking to complete the front panel BOM for the Thomas White
Rotary Klee MOTM panel soon in production by BrideChamber.
After some quick emails with Thomas, I put together a PRELIMINARY BOM.
His rotary design and the BOM is in the KleeRotary folder I just
created here in the Files area.
There are a few parts that I need help on- namely some of the toggles,
and confirmation of whether the knobs should be the large MOTM size or
the small ones. They are highlighted in yellow.
I'm also going to probably substitute the $9 Lumex panel LEDs with a
$.09 LED panel mount and a T1 standard LED to save about $175 on the
build. Suggestions for proper T1 LEDs are welcome.
Thomas- if you see this and find any of this content objectionable let
me know and I'll remove it.
Please let me know if you have any suggestions for the BOM so that I
can complete it.
Thanks in advance,
Steve from Modularland.com
I'm looking to complete the front panel BOM for the Thomas White
Rotary Klee MOTM panel soon in production by BrideChamber.
After some quick emails with Thomas, I put together a PRELIMINARY BOM.
His rotary design and the BOM is in the KleeRotary folder I just
created here in the Files area.
There are a few parts that I need help on- namely some of the toggles,
and confirmation of whether the knobs should be the large MOTM size or
the small ones. They are highlighted in yellow.
I'm also going to probably substitute the $9 Lumex panel LEDs with a
$.09 LED panel mount and a T1 standard LED to save about $175 on the
build. Suggestions for proper T1 LEDs are welcome.
Thomas- if you see this and find any of this content objectionable let
me know and I'll remove it.
Please let me know if you have any suggestions for the BOM so that I
can complete it.
Thanks in advance,
Steve from Modularland.com