I would be very interested in FracRack Panels, too. I have a Tau Phaser,
Mankato, JH FS1A, waiting for FracRack panel designs. I've got one for the
frequency shifter mostly done, but it is quite bare bones.
David
From: ModularSynthPanels@yahoogroups.com
[mailto:ModularSynthPanels@yahoogroups.com] On Behalf Of hulmedan
Sent: Tuesday, October 14, 2008 1:38 PM
To: ModularSynthPanels@yahoogroups.com
Subject: [ModularSynthPanels] Re: Frac Panel interest?
Hey Scott, just reading through some of the old threads..
Just wondering what happened with any plans for frac panel
fabrication? I am certainly interested in any frac format panels you
produce..I would LOVE the tau pipe..i'm sure the wogglebug would be
popular!
Mankato, JH FS1A, waiting for FracRack panel designs. I've got one for the
frequency shifter mostly done, but it is quite bare bones.
David
From: ModularSynthPanels@yahoogroups.com
[mailto:ModularSynthPanels@yahoogroups.com] On Behalf Of hulmedan
Sent: Tuesday, October 14, 2008 1:38 PM
To: ModularSynthPanels@yahoogroups.com
Subject: [ModularSynthPanels] Re: Frac Panel interest?
Hey Scott, just reading through some of the old threads..
Just wondering what happened with any plans for frac panel
fabrication? I am certainly interested in any frac format panels you
produce..I would LOVE the tau pipe..i'm sure the wogglebug would be
popular!
--- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@...> wrote:
>
> Yeah, I'll feel out the situ.
> I wouldn't mind just doing panels, and no full kits or assembled
> modules.
> I want to be considerate, but I also want DIYers to have nice panels.
> The mutual benefit thing might work, though I think I brought it up to
> Metalbox before.
> I'll keep all y'all posted, sounds like there is plenty of interest!
>
> Cheers,
> Scott Deyo
> The Bridechamber
> contact@...
> http://www.bridechamber.com
> Jealous Edison Record Kompany
> http://www.jealousedison.com
>
>
> On Jul 23, 2008, at 6:27 PM, data2action wrote:
>
> > i thot you'd never ask. YES, absolutely.
> >
> > also, i appreciate & respect your consideration for metalbox--very
> > glad to see that kind of integrity. but my sense is there's not so
> > much overlap between DIYers and folks who want to build complete
> > modules. and i can imagine them actually selling more prebuilt
> > modules if their front panels included dial markings etc... might
> > lower their costs, too. so maybe there could be some mutual benefit
> > to everyone if you did panels for their modules, and also sold them
> > naked for us solderhuffers. worth asking, i think.
> >
> > bbob
> >
> > --- In ModularSynthPanels@yahoogroups.com, Scott Deyo <contact@>
> > wrote:
> > >
> > > Hello All,
> > >
> > > Now that I'm delving into thinner metals for DotCom, is there any
> > > interest out there for Frac format stuff?
> > > I can't do CGS or Ian stuff (see Metalbox and Elby Designs for
> > those),
> > > but it would be easy to lay out MFOS and YuSynth stuff, maybe
> > the 'Bug,
> > > stuff like that.
> > > I'd expect panels to be $20 for 2U, maybe even less.
> > > I don't think I'd put out any MFOS stuff obviously already done so
> > well
> > > by Blacet, but I'm open to suggestions.
> > > I'd have to come out w/ a new bracket, 4 .375" holes at 1.15"
> > spacing,
> > > which might be valuable in itself.
> > >
> > > Whatchyall think?
> > >
> > > Scott Deyo
> > > The Bridechamber
> > > contact@
> > > http://www.bridechamber.com
> > > Jealous Edison Record Kompany
> > > http://www.jealousedison.com
> > >
> >
> >
> >
>