On Sun, 30 Mar 2008, Mark wrote:
line) switch the suppresion grid as per Ken's modding suggestions
on his website. I'm *guessing* that since he changed the board
layout, he went to the trouble of testing this first but I wanted
a challenge anyway.
Photo is in the root directory of the files area with a 'CGS65'
prefix.
Comments welcome (mostly)...
--
Monty Brandenberg
> Two grids?? Do you mean you are switching the suppression grid asThe jumper alternatives on the board (one solid line, one dashed
> well?? My plan was to switch the bias on the signal grid between two
> values. Did you take any voltage measurements??
line) switch the suppresion grid as per Ken's modding suggestions
on his website. I'm *guessing* that since he changed the board
layout, he went to the trouble of testing this first but I wanted
a challenge anyway.
Photo is in the root directory of the files area with a 'CGS65'
prefix.
Comments welcome (mostly)...
--
Monty Brandenberg