----- Original Message -----From: Scott DeyoSent: Friday, March 14, 2008 3:15 PMSubject: [ModularSynthPanels] sn voice and 'bug proposed designsHello Group,
I have proposed designs in the files section, under Bridechamber Proposed Designs.
There is a 3U SN Voice and a 2U Wogglebug.
Both are standard, no-mod designs.
The only thing on the SN voice is we will use a toggle for the range. Center off will leave
one cap connected, up will connect a big cap in parallel, and down will connect a medium
cap in parallel. Much easier and less expensive than a rotary.
Also, I used a switch to choose between LFO and EG PWM and left off the fixed. Is OK or
should be try to jam a rotary in there? Or an attenuator? It will get cramped...
I haven't heard much about the 'Bug -- some want dual 'Bugs w/ Child Tone outputs, but
this would make it 4U. I can do that, but I need to know what people want.
Cheers,
Scott
Message
Re: [ModularSynthPanels] sn voice and 'bug proposed designs
2008-03-14 by krisp
Hi Scott and all
That's almost the same as the panels I had made by
Schaeffer picture in the files somewhere
I used on-on-on switches to get the 50%, EG and LFO
on one switch also used one of them on the LFO rate switch
also I think the you should have the pots in this
order
Rate
Rate CV
Cluster
down the left hand side as they are in that
order on the PCB for easy mounting to the panel
Cheers
Paul Darlow