Re: Strings Preference
2007-06-14 by Doug Berg
... violins ... restricted ... very ... just ... Re: Most interesting. #703 still has original BB tapes, still playable, thanks Martin as azimuth made a big
Yahoo Groups archive
Messages
Page 37 of 269 · 13421 messages matched
2007-06-14 by Doug Berg
... violins ... restricted ... very ... just ... Re: Most interesting. #703 still has original BB tapes, still playable, thanks Martin as azimuth made a big
2007-06-14 by John Beresford
Hi Bernie, A couple of years ago Martin made up a frame containing M400 violins at my request despite him telling me I wouldn t like them. He was right I
2007-06-14 by Jerry Korb
... Hi Gang, Been reading last evening s discussion of heads, tapes, and violin sounds. Thought this was covered long ago. .... ....Anyway, here it is again
2007-06-14 by tronbros@aol.com
Here are some points to take into consideration: The MKII Violins are the M400 Violins. The M400 version was sweetened to make it more appealing but this can
2007-06-14 by Bruce Daily
... Hi, all- Good question about the MKII/M400 differences. Much is done these days to restore/remaster ANY older recordings. The Streetly recordings site
2007-06-14 by Bernie
... like. ... Rick, does the FX also have high impedance heads? I think I remember Jerry telling me this, but my memory is a little foggy. Thanks for the heads
2007-06-14 by Bernie
John, if I understand correctly, the MkI/MkII Trons have low impedance heads and the M400-type Trons have high impedance heads, necessitating a re-EQ ing of
2007-06-14 by Rick Blechta
... MkII wins hands down. I started with a 400 (sold to Saga s Michael Sadler) and moved to the FX console in 1974. That started out with MkII strings but I
2007-06-14 by john barrick
Bernie, may I ask what the difference is and how do you tell? 1407 (M400SM) has Three Violins, Cello, Eight Voice Choir - I assume it s original to the
2007-06-14 by Bernie
For those of you who own an M400-type Tron (M400, Mark V, etc), which 3 Violin sound do you prefer and why? * MkII 3 Violins * M400 3 Violins I have the
2007-06-12 by ceccles_ca
... Hey evil-gas-man... If you are going to the shops, pick-up a case of Beano, will you please? Post your Beano success story here:
2007-06-11 by Mike Dickson
... I think I would just *go to the shops to buy it again*. :-) -- Mike Dickson (tron@blackcat.demon.co.uk) M400 #996 The Official Cynic of Streetly
2007-06-11 by ceccles_ca
... Physically warped or content warped? (ha) The vacuum stabilizer would flatten out warped LP s nicely when the disc was high in the center. Of course if
2007-06-11 by Rick Blechta
... It won t do any good unless he s downwind. Rick
2007-06-11 by Mark Wallis
Forgot this bit! I only recently realised that the speed issues must have set me back YEARS when it came to trying to develop an accurate sense of pitch. And
2007-06-11 by Mark Wallis
Hi all. My first record player was the family s old G.E.C. 4-speed unit. This venerable beast featured rubber tyres in it s drive mechanism and these were well
2007-06-11 by lsf5275@aol.com
In a message dated 6/11/2007 3:23:24 P.M. Eastern Daylight Time, ecclesreinson@rogers.com writes: I worked in retail audio and sold hundreds of Luxman and
2007-06-11 by Colin Crawford
On 11 Jun 2007, at 20:20, ceccles_ca wrote: When it sucked ... Oooh, Matron! Cx
2007-06-11 by ceccles_ca
... I worked in retail audio and sold hundreds of Luxman and Denon TT s. I only sold one of those Lux vacuum suckers (PD 300). When it sucked properly, it was
2007-06-11 by leetronhead
... Hence the ... list. I ... You re still ... wasn t booted from the list.
2007-06-11 by jonesalley
After all, both Frank MkII and I are still allowed to post...
2007-06-11 by ceccles_ca
... list. ... Can we vote Mic Dinkson off the island?
2007-06-11 by Mark Wallis
Hi guys. It would appear that all emails have been bouncing at this address.. Not sure why but it appears to be all sorted out now. At least I wasn t waiting
2007-06-11 by Mike Dickson
... There s that voice again... -- Mike Dickson (tron@blackcat.demon.co.uk) M400 #996 The Official Cynic of Streetly Electronics Streetly Sample Library
2007-06-11 by Bernie
Mark, there have been posts every day for the last week. Do you normally receive them via email? Bernie ... Hence the ... list. I ... You re still ... Audition
2007-06-11 by Donald Tillman
... Dude, not even slightly. (Understand that I am strongly opposed to limiting the expression of ideas, and two, I m way too busy to do that. You have to do
2007-06-11 by Mark Wallis
Jolly good. Most reassuring. ;-) Hadn t seen any new posts for nearly a week, including my own. Hence the question. Best wishes to all, MSW, T,E. ...
2007-06-11 by lsf5275@aol.com
In a message dated 6/11/2007 10:56:35 A.M. Eastern Daylight Time, markstuartwallis@hotmail.com writes: Hi Don, Just wondering if I ve been kicked off the
2007-06-11 by Mark Wallis
Hi Don, Just wondering if I ve been kicked off the mellotronists mailing list. I may indeed have made one or two unpopular comments and upheld some
2007-06-11 by Colin Crawford
Martinge! Do you have two of *That particular* http://www.thevintageknob.org/LUXMAN/PD555/PD555.html model of Luxman? Respec man!! Cx http://www.s-club.co.uk
2007-06-11 by Colin Crawford
Linn LP12 every time.... Especially with the Hercules PSU which enables 45rpm...... Cx
2007-06-11 by Bruce Daily
... Thanks Frank- Thought I would mention that the 2 aurally offending pinch rollers have quieted down after a few days of playing (noodling, actually). This
2007-06-11 by lsf5275@aol.com
In a message dated 6/10/2007 3:39:03 P.M. Eastern Daylight Time, caddyfam@yahoo.com writes: RE: Hello again, Don t know what the experts use, but for the
2007-06-10 by Doug Berg
... rollers I use a triflon compound oil, smells like bananas, because you need just a little and it lasts a long time. The oil has Teflon in it and stays on
2007-06-10 by James Bailey
... Sorry I can t really help with your particular problem Bruce, but this reminds me of something I ve been meaning to mention here. At work, there are about
2007-06-10 by jeffc@netaxs.com
i just watched hal hartley s fay grim . i won t comment on the film here - not the appropriate place for that, but i am pretty sure i heard mellotron strings
2007-06-10 by Bruce Daily
Hi all- Interesting pinch roller rejuvinator product from US Recording. I wonder what chemicals it is composed of? Went to the linked website, didn t find
2007-06-09 by NormLeete@aol.com
In a message dated 08/06/2007 19:07:01 GMT Standard Time, tronbros@aol.com writes: I swear by my two Luxmans. I also exclusively use a Luxman. Bought cheap in
2007-06-09 by NormLeete@aol.com
In a message dated 08/06/2007 03:40:41 GMT Standard Time, punchbowl4@earthlink.net writes: The additive synthesis in the Synergy is an interesting opportunity
2007-06-09 by ceccles_ca
... http://www.thevintageknob.org/LUXMAN/PD555/PD555.html Lux made some great stuff in the early 80 s. Most linear tracking TT were crap. The first linear
2007-06-09 by MAinPsych@aol.com
How s this as a suitable answer for cleaning Mellotron pinch rollers? _http://www.usrecordingmedia.com/larc5twopapi.html_
2007-06-09 by leetronhead
Phillips touch sensor or Technique (broadcast standard only runs around 250.) Lee
2007-06-08 by jeffc@netaxs.com
... SOLD! awesome - thanks mr g! i ll ring ya this weekend... ...jeff
2007-06-08 by tronbros@aol.com
I swear by my two Luxmans. Both old, both excellent. Martin
2007-06-08 by john barrick
Gino, is that the one that looks like a flying saucer? I remember seeing one of those in the late 70s that someone had mounted multiple tonearms on...
2007-06-08 by gino wong
Jeff, I have a very good Micro Seiki boxed up. Why don t you just come get that instead of buying a table. You know us old DJs keep plenty of turntables in
2007-06-08 by Brundage, Jim
http://www.youtube.com/watch?v=HO9CfzIx63s Jim - #912 ... This message (including any attachments) may contain confidential information intended for a specific
2007-06-08 by dandc74
I did have access to an 80rpm 1/4 thick Edision disc but sadly, no cylinders or shellacs yet(I think I may have seen of those years ago in pretty sorry
2007-06-08 by gino wong
I had use of a DX knob programmer for a while. I acted like such a brat my boss rented me one . I used it on the 7 and the TX rack and got the only truly
2007-06-08 by jeffc@netaxs.com
... the stantons are on ebay all the time. i am about to buy my first turntable in 30 years. the technics sl-220 i bought in high school won t maintain a