Mellotronists group photo

Yahoo Groups archive

Mellotronists

Index last updated: 2026-04-28 23:09 UTC

Message

Re: Salt Lake City

2006-09-12 by dandc74

Interesting details there, Gene.  And after pursuing #574 for 20 years
(finally got to take it home last Novemeber) here I was thinking I had
the only known 'tron in the state!  Thirty minutes from Salt Lake, I
wonder where Greg Walker calls home?

FS. Weller
M400SM #574

--- In Mellotronists@yahoogroups.com, "Gene Stopp" <gene@...> wrote:
>
> Greg should be in possession of the "Microphonico-tron" (forgot the
s/n) that caused nasty feedback at ProgWest a few years ago. If you
knocked on the lid you could hear it loud a clear over FOH. Turned out
to be the headblock being shorted to the frame, due to a problem with
the non-conductive washer on one of the headblock retention springs.
Taking it apart and putting it back together right fixed it right up.
>  
> He does tend to loan it out a lot so it may not be there...
>  
> - Gene
> 
>  
> 
> -----Original Message-----
> From: Mellotronists@yahoogroups.com
[mailto:Mellotronists@yahoogroups.com]On Behalf Of dandc74
> Sent: Tuesday, September 12, 2006 7:30 AM
> To: Mellotronists@yahoogroups.com
> Subject: [Mellotronists] Re: Salt Lake City
> 
> 
> 
> Lots of stuff to see and do within a short drive of SLC. E-mail me
> off list if you'd like more info.
> 
> By the way, the only living 'tron in Utah resides about 80 miles north
> of SLC; about an hour's drive. At least it's the only 'tron *I* know
> of....
> 
> FS. Weller
> M400SM #574
> 
> --- In Mellotronists@ <mailto:Mellotronists%40yahoogroups.com>
yahoogroups.com, pete <marabus@> wrote:
> >
> > Mary Ann & I are leaving tomorrow morning for a 5 day trip to
SLT.Just 
> > curious if anyone has any recommendations on places to see.
> > I know Greg Walker is only 30 miles from there MMMMMMMMMMMMMMMM ;-)
> > Pete
> >
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.