..and the Fetzer valves; make sure they're properly packed with 30 weight
oil, gauze pads and your standard ball bearings.
Standardly yours,
Ted Underhill, Mrs. (deceased)
Bontempi Air Organ #666
-----Original Message-----
From: fdoddy@... [mailto:fdoddy@...]
Sent: Tuesday, February 05, 2002 6:03 PM
To: mellotronists@yahoogroups.com
Subject: [Mellotronists] working on machines!!!
Chez writes:
Uh huh, or try to replace all the filter caps on a Hammond tone generator!
That's real fun when there's no room for the "SODERING" iron.
chjes #997
I know what you mean! I was tweaking a Keeney valve the other day and the
main washer, the galvanized one ,not the rubber O-ring, has a franklin-type
key on it. Needless to say, I struggled like hell to obtain the correct
amount of torque before realizing the threads were reversed! Go figure.
Fritz m400#1697 fram circulating pump #0002-a34c
To unsubscribe from this group, send an email to:
Mellotronists-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
oil, gauze pads and your standard ball bearings.
Standardly yours,
Ted Underhill, Mrs. (deceased)
Bontempi Air Organ #666
-----Original Message-----
From: fdoddy@... [mailto:fdoddy@...]
Sent: Tuesday, February 05, 2002 6:03 PM
To: mellotronists@yahoogroups.com
Subject: [Mellotronists] working on machines!!!
Chez writes:
Uh huh, or try to replace all the filter caps on a Hammond tone generator!
That's real fun when there's no room for the "SODERING" iron.
chjes #997
I know what you mean! I was tweaking a Keeney valve the other day and the
main washer, the galvanized one ,not the rubber O-ring, has a franklin-type
key on it. Needless to say, I struggled like hell to obtain the correct
amount of torque before realizing the threads were reversed! Go figure.
Fritz m400#1697 fram circulating pump #0002-a34c
To unsubscribe from this group, send an email to:
Mellotronists-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/