RE: [MarcosManiacs] Shipping Marcos race car from Japan to U.S.
2005-06-05 by john_sutton
An dy, Well done! I raced with Tim at the Nurburgring 500 km race in 1962. My car was the earlier model (ugly duckling). I have been trying to trace mine
Messages
Browse messages
Page 52 of 112 · 5570 messages matched
Re: [MarcosManiacs] Shipping Marcos race car from Japan to U.S.
2005-06-05 by Baufi-Fey@web.de
MarcosManiacs@yahoogroups.com schrieb am 05.06.05 01:41:11: Well, I ve gone & done it: I (re) purchased my old race car, 1962 Marcos GT Luton Gullwing
Shipping Marcos race car from Japan to U.S.
2005-06-04 by Andy&Alison Seward
Well, I ve gone & done it: I (re) purchased my old race car, 1962 Marcos GT Luton Gullwing chassis #2006 from its current owner in Japan. This is the
Re: Holiday in Canada (AB/BC)
2005-06-01 by ukcadsev
Hi John, I sent you a separate email via the email link in Yahoo groups - did you get it?? My email link should work OK. Cheers, Nick -- In
TSO Coming to Canada
2005-05-30 by McLeod, Ronald
Maniacs . . . See the attached article, which appeared in the Saturday, May 28, edition of the Toronto Star newspaper. Also attached is the photo which
Re: Holiday in Canada (AB/BC)
2005-05-28 by bennywhiz
... 1986 Marcos Mantula Coupe Hi Nick, I live in Victoria, I have three Marcos in various stages of restoration, and if you would like to visit, you would be
Re: Marcos race car - does anyone recognize this one?
2005-05-28 by Christian Fey
Hello Andy, this should be Mantula XP you mentioned and is in the book. The car was build & delivered for Japan, but never raced as far as I know. It should be
Marcos race car - does anyone recognize this one?
2005-05-27 by Andy&Alison Seward
Just ran across this Marcos race car, currently for sale in Japan, at the following Internet Link:
Holiday in Canada (AB/BC)
2005-05-27 by ukcadsev
Hi all, I m coming on holiday to BC and Alberta in June from the UK, and wondered if I would be able to meet up with anyone. I know I ll be near Kelowna on the
RE: [MarcosManiacs] Re: Marcos Mantis on eBay
2005-05-26 by McLeod, Ronald
Kevin is right. The Mantis windscreen is not flat. From the outside, it has a slight convex curve both from bottom to top, and from side to side. Kevin . . .
Re: [MarcosManiacs] Re: Marcos Mantis on eBay
2005-05-26 by K Papworth
Hi Christian The windscreen for the 70s Mantis are not flat. as I have taken two out of the cars, and will be putting them back with a bit of luck. ... From:
Re: Marcos Mantis on eBay
2005-05-26 by Christian Fey
I don´t think that it will be difficult to get a new windscreen for the Mantis 2/2. I got end of last year a list from Pilkington with the still existing
RE: [MarcosManiacs] Marcos Mantis on eBay
2005-05-25 by McLeod, Ronald
Hmmmm. Seller says it needs new windscreen and new engine (Triumph 2.5PI). I guarantee that the engine will be the easy part. The windscreen is practically
Marcos Mantis on eBay
2005-05-25 by Andy&Alison Seward
Mantis alert! Here is the Internet link: http://cgi.ebay.co.uk/ws/eBayISAPI.dll?ViewItem&category=29750&item=4552312306&rd=1 No idea on the seller, etc. Just
New file uploaded to MarcosManiacs
2005-05-15 by MarcosManiacs@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the MarcosManiacs group. File : /Marcos
Re: Front end alignment
2005-05-15 by Don Lattimer
Yes, those specs are for a 1969 wood chassis. I use the same on my 1971 steel chassis vehicle and it works fine. I had to play with the camber a little with
Re: [MarcosManiacs] Re: Front end alignment
2005-05-15 by Meggsief@aol.com
Ditto Don, On the 66and the 69 wood chasis is that the optimal setting? Hal #5353/#5006
RE: [MarcosManiacs] Re: Front end alignment
2005-05-15 by Robert Carroll
Hey Don, Do you know if these specs are the same for a 69 wood chassis? -Bob ... From: MarcosManiacs@yahoogroups.com [mailto:MarcosManiacs@yahoogroups.com] On
Re: Another Marcos in Canada
2005-05-14 by Don Lattimer
Welcome Paul, I ll put your car on the Registry. Nice to see one coming this way rather than being exported to Europe. Enjoy!! Don #3M5759 ... cars. ...
Re: Front end alignment
2005-05-14 by Don Lattimer
Michael, Castor: 6 degrees Camber: 0 degrees Toe-in: 1/16 to 1/8 Don ... Does ... can
Re: Rebuild Progress Report
2005-05-13 by Ash
Hi again Don et al, Factually my statement below was correct, eg you need the bellhousing from a v4 to join the Type 9 to and essex, however as I have now
RE: [MarcosManiacs] Another Marcos in Canada
2005-05-13 by Garry Diver
Hello Paul, Welcome to the Marcos Owners group. If you need any parts in Canada let me know. Garry Diver MarcosParts USA
Front end alignment
2005-05-13 by mgacoupe1959
Hi all, I plan to get the front end of my 70 Marcos aligned next week. Does anyone have the specs i.e. caster, camber, toe in, or any advice I can give the
RE: [MarcosManiacs] Another Marcos in Canada
2005-05-12 by pauldransfield@iname.com
Hi Paul, It s nice to hear your car has finally arrived. Congratulations. But do you think a small town like Aurora is big enough for the two of us? I got used
RE: [MarcosManiacs] Another Marcos in Canada
2005-05-12 by Bob Carroll
Congratulations Paul! At least you get to drive your new toy. I got mine (#5366) back in December and after discovering some structural issues with the wood
Another Marcos in Canada
2005-05-12 by pwstevens11
Hello All, I would like to take this opportunity in introducing myself to the group. I have for many years been a Marcos fan and admirer of the cars. I
Re: [MarcosManiacs] Type 9 5 speed box
2005-05-10 by paul verdeyen
Ashley Greetings. Try talking to Graham @ G & S Escorts in Widnes, tell number 0151 422 8333 or email sarah.w2002@ukonline.co.uk He knows what he is talking
Type 9 5 speed box
2005-05-09 by Ash
Good evening all, I would like to get the advice of any one who has fitted the Ford type 9 (N) 5 speed box to the Frod essex engined cars. I am in the process
RE: [MarcosManiacs] Garry Diver Message #3014
2005-05-06 by Garry Diver
Don, I don t think I get all the Maniacs correspondence, could you resend it directly. Garry ... Garry, Did you happen to read this message? Have a few
Garry Diver Message #3014
2005-05-05 by Don Lattimer
Garry, Did you happen to read this message? Have a few questions. Thanks. Don
Re: [MarcosManiacs] LM500
2005-05-05 by Garry Diver
I will go to the country in Georgia and licence it as a kit car Garry
Re: [MarcosManiacs] LM500
2005-05-04 by Don Lattimer
Mantaray??? How are you going to license that or is it for racing?? Don ... From: Garry Diver To: MarcosManiacs@yahoogroups.com Sent: Wednesday, May 04, 2005
Re: [MarcosManiacs] LM500
2005-05-04 by Garry Diver
Hi Alvin I have a container leaving the UK in about three weeks that has my Mantaray and Mini Marcos MkVI. Have room for a car if you can get one in time. I
Re: [MarcosManiacs] LM500
2005-05-03 by Don Lattimer
Not that I m aware of. There s a 1994 (?) Martina in SoCal but that s about it. There may soon be new Marcos available in Canada. Keep your eyes open! Don
Re: [MarcosManiacs] LM500
2005-05-03 by RockStar30Cars@aol.com
Hello Don, is there anyway to get a Mantis LM500 to sunny southern California? Alvin (TopDogRover)
Interesting Ex Jem Marsh car on ebay
2005-04-27 by Ash
http://cgi.ebay.co.uk/ws/eBayISAPI.dll? viewItem&category=29753&item=4545528215&rd=1 Looks quite interesting! Ash
Re: [MarcosManiacs] LM500
2005-04-27 by Don Lattimer
Dale, You might want to get on the Marcos Enthusiasts Board in the UK: http://p206.ezboard.com/bmarcossportscarenthusiasts They have a section on the LMs .
LM500
2005-04-27 by Dale Cannavan
Hi Guys, Seriously considering exchanging my BMW ZMcoupe for a LM500. A bit of a change to give me a few more rough edges. What are the key areas I should
Re: [MarcosManiacs] New Marcos in Canada
2005-04-27 by Don Lattimer
Heck, I d be happy just to have a continental meet on this side of the pond. Unfortunately this is a big place and getting folks to travel any distance is
RE: [MarcosManiacs] New Marcos in Canada
2005-04-27 by Richard Porter
... The Marcos Owners Club did for a while have a Mini Marcos section. This then split off as an independant club for a number of reasons, not least because
Re: Rebuild Progress Report
2005-04-27 by Ash
Hi Don, Yep the bell housing from the V4 is necessary for the conversion, I m lucky enough to have one, there are a few available second hand (I have some
RE: [MarcosManiacs] New Marcos in Canada
2005-04-27 by pauldransfield@iname.com
Hi Richard, The distinction I was alluding to was that even if both groups belong to the same club (notice I said groups), it would not be appropriate for
Re: [MarcosManiacs] New Marcos in Canada
2005-04-26 by Richard Porter
... Yes - he s a Mr. R. Scott who runs a poster site so I doubt if there s any connection or he might have mentioned it. Richard -- Richard Porter M
Re: [MarcosManiacs] Rebuild Progress Report
2005-04-26 by Don Lattimer
Ash, Did you end up using the bellhousing from the V4?? If not, what did you use? Don ... From: Ash To: MarcosManiacs@yahoogroups.com Sent: Tuesday, April 26,
Re: [MarcosManiacs] New Marcos in Canada
2005-04-26 by Don Lattimer
Richard, I was just on your site and the latest guestbook entry is from a Mr. Scott from Canada! Maybe we should contact him. There are few Mini Marcos in
RE: [MarcosManiacs] New Marcos in Canada
2005-04-26 by Richard Porter
... Paul, your observation is quite correct but not really pertinent. The MMOC web site has a contacts page on which the other Marcos clubs are listed. In some
Rebuild Progress Report
2005-04-26 by Ash
Evening all, (well for those in the UK at least). I thought I d drop a quick note to say that I have at last found myself a suitable firve speed box to drop
Re: [MarcosManiacs] New Marcos in Canada
2005-04-26 by Don Lattimer
Paul, I believe the article will be about the TSO and Marcos interest in North America. I gave Tony Ron s contact info and will pass yours along also.
RE: [MarcosManiacs] New Marcos in Canada
2005-04-26 by pauldransfield@iname.com
Hi Don, Generally, the Marcos coupes and Mini Marcoses are supported by separate groups. The cars are completely different animals so if the article is about
New Marcos in Canada
2005-04-26 by Don Lattimer
Hi all, Tony Stelliga just emailed me regarding an upcoming story about Marcos for a Canadian newspaper (don t know which one). He requested the email address