The Kawai & Teisco Analog Synths Group

>
> Hello!
> 
> My SX-210 works well except one thing:
> Decay of the one voice is dead (no sound), but if i set it to "0", and sustain to "99" - it sound just like other ones..
> There is some little pots inside (near every SSM filter) - what do they do?
> And maybe someone know what chip and/or resistors control VCA or decay?
> 
> Thanks in advance!
> 
> Btw. i can post here presets from my SX (i recorded them n WAV when it arrived, and i think is a factory presets:)
> I tested file on my own SX many times and it works just well!
> 
> XOR
>

>
> My bet is a bad 4066. Mine had few.
> 
> 
> --- In kawai-teisco@yahoogroups.com, "xorsister" <aliendelon@> wrote:
> >
> > Hello!
> > 
> > My SX-210 works well except one thing:
> > Decay of the one voice is dead (no sound), but if i set it to "0", and sustain to "99" - it sound just like other ones..
> > There is some little pots inside (near every SSM filter) - what do they do?
> > And maybe someone know what chip and/or resistors control VCA or decay?
> > 
> > Thanks in advance!
> > 
> > Btw. i can post here presets from my SX (i recorded them n WAV when it arrived, and i think is a factory presets:)
> > I tested file on my own SX many times and it works just well!
> > 
> > XOR
> >
>