DIY PCB with press and peel blue.
Started 2016-06-26 by mark.phillis@...
Threads
Recent topics
Preferred orientation for each electrical connection ?
Started 2016-06-28 by alan00463@...
Leftover copper
Started 2016-06-25 by Brad
Silkscreening
Started 2016-06-23 by Brad
Accurate drilling, cutting?
Started 2016-06-20 by Brad
Etching with vinegar, peroxide and salt
Started 2016-06-19 by Brad
Any body else see this new development
Started 2016-06-18 by davesage12@...
Press-N-Peel
Started 2016-06-17 by Roland Harriston
First attempt at toner transfer
Started 2016-05-30 by Brad
Amount of etchant needed
Started 2016-05-27 by Brad
Best method for making good quick double sided SMT prototype boards
Started 2016-06-08 by rchadwick7@...
CuCl2 Adam Seychell site links error?
Started 2016-05-30 by jcarlosmor@...
Substitute for Sodium Persulphate
Started 2016-05-28 by Harvey White
Recent virus incursions
Started 2016-05-09 by Steve Greenfield
images for photoresist
Started 2016-04-12 by Jeff Heiss
[Homebrew_PCBs] $25 Direct Laser Printing
Started 2016-03-31 by Mark Lerman
Got some single side boards
Started 2016-03-31 by unclefalter@...
Mark-8 'Non-plated through holes' and 2 sided PCBs
Started 2016-03-19 by Brad
Custom G10 copper clad
Started 2016-03-17 by Brad
First try at DIY Solder Mask
Started 2016-03-16 by duwaynes@...
DIY plated through holes.
Started 2016-03-09 by Jeff Heiss
[Homebrew_PCBs] Easy Double Sided PCBs via DLP
Started 2016-03-08 by Mark Lerman
Finished boards
Started 2016-02-28 by richard@...
drill pcb
Started 2016-02-21 by rfmicrowave1@...
Proxxon rotary tool/press/vice and mods
Started 2016-02-27 by mosaicmerc@...
PCB Drilling
Started 2016-02-22 by camillus_blockx@...
Toner removal after etching
Started 2016-02-25 by castle.yankee@...
Drilling circuit boards on the cheap:
Started 2016-02-14 by bobledoux@...
Plastic Resist From 3D Printer?
Started 2016-01-25 by palciatore@...
Guillotine cutter
Started 2016-01-22 by alan00463@...
Re: [Homebrew_PCBs] Re: Drilling circuit boards on the cheap: [3 Attachments]
Started 2016-02-17 by Malcolm Parker-Lisberg
Use for microwave oven ?
Started 2016-02-13 by Corey Minion
Power amp project
Started 2016-02-15 by Norm
Re: Danger of Chemical Exposure.
Started 2016-02-02 by Tim Gibbs
Re: Double sided registration
Started 2016-01-31 by AncelB
Chemical Exposure.
Started 2016-02-01 by AncelB
Re: pcb?
Started 2016-02-04 by Cristian
homemade four layer boards
Started 2016-01-26 by Jeff Heiss
Double sided cold toner transfer experiment
Started 2016-01-29 by duwaynes@...
DK5NOA's 20 W amp mods
Started 2016-01-28 by Marc.olanie@...
more experiments with Toner transfer by etching the boards first
Started 2016-01-17 by verstelle@...
RE: Vinyl mask, laser paint removal (was:Re: [Homebrew_PCBs] Plastic Resist From 3D Printer?) [1 Attachment]
Started 2016-01-26 by Bob Butcher
RE: [Homebrew_PCBs] Re: more experiments with Toner transfer by etching the boards first [1 Attachment]
Started 2016-01-26 by Boman33
My materials for "Cold Process?"
Started 2016-01-18 by Kirk Kleinschmidt
Fwd: Cold Toner Transfer
Started 2016-01-19 by rolohar@...
PCB Mini-Factory
Started 2016-01-19 by Steve Greenfield
Anyone milling PCBs?
Started 2015-12-31 by me@...
Heatless (cold) Toner Transfer for PCB making
Started 2016-01-05 by leeleduc@...
power supply circuit for nim bin module
Started 2016-01-13 by john_chortomaris@...
portable power supply NIM module
Started 2016-01-09 by john_chortomaris@...