Fwd: RE: All-write A1002 fast dry ink
2006-05-10 by Steve Greenfield
The following is a conversation I had with Steve Liker about Trident-ITW's All-Write A1002 fast dry ink. Start from the bottom. Sorry about that, that's how it goes. Steve Greenfield
Show quoted textHide quoted text
> It can be mentioned as an "in process development." Printer not > yet > available. System to be built by iTi in Boulder, Colorado. > www.iticorp.com. Trident only provides the printhead component. > > Sincerely, > Steve Liker > Business Manager > Trident-ITW > 1114 Federal Road > Brookfield, Connecticut 06470 USA > Phone: +1-203-740-9333, ext. 3037 > Fax: +1-203-775-9660 > email: Sliker@... > Web: www.trident-itw.com > > -----Original Message----- > From: Steve Greenfield [mailto:alienrelics@...] > Sent: Tuesday, May 09, 2006 8:55 AM > To: STEVE LIKER > Subject: RE: All-write A1002 fast dry ink > > May I mention this on the Homebrew_PCBs list? If so, any other > details? Are you building the printer? > > Steve Greenfield > > --- STEVE LIKER <sliker@...> wrote: > > > Yes, we are. This is a new growing application for ink jet > > technology. > > > > Sincerely, > > Steve Liker > > > > ________________________________ > > > > From: Steve Greenfield [mailto:alienrelics@...] > > Sent: Mon 5/8/2006 7:25 PM > > To: STEVE LIKER > > Subject: RE: All-write A1002 fast dry ink > > > > > > > > So you are working on this for an acid/etch resist? > > > > If so, yes, I'm very interested. Not for me, but for the > > Homebrew_PCBs list. > > > > Steve Greenfield > > > > --- STEVE LIKER <sliker@...> wrote: > > > > > Dear Steve, > > > No we have not tested this ink in the Epson printhead. The > > > viscosity of the A1002 is too thick for the Epson. In > > addition, > > > the Epson printhead is not designed for aggressive solvents. > > > However, we are involved in using our Trident piezo > printheads > > > for jetting high alkaline fluid to etch resist. Let me know > if > > > interested in discussing further. > > > > > > Sincerely, > > > Steve Liker > > > > > > ________________________________ > > > > > > From: Steve Greenfield [mailto:alienrelics@...] > > > Sent: Fri 5/5/2006 2:49 PM > > > To: STEVE LIKER > > > Subject: All-write A1002 fast dry ink > > > > > > > > > > > > Have you by chance tested this ink in an Epson piezo head? > > > > > > On the Homebrew_PCBs list we've been discussing using inkjet > > > printers to print acid resist ink right onto blank printed > > > circuit > > > boards. So this would be printed onto uncoated cleaned > copper. > > > > > > Thank you, > > > > > > Steve Greenfield // Digital photography, > > scanning, > > > Polymorph Digital Photography // retouching, and > photomorphing > > > 253-318-2473 voice // to your specs. > > > polymorph@... // > > > http://www.polyphoto.com/ // Based in Tacoma, WA, USA