Homebrew PCBs

oops---link didnt work---but its in the file section.
mebo


--- In Homebrew_PCBs@yahoogroups.com, "pebo festus" <mebo31@y...> 
wrote:
> 
> here is a pic where i printed on a pcb.
> 
> 
> 
http://f4.grp.yahoofs.com/v1/oFS6QYGAwga4EupkAfzTqr_42QCuaSsybaSdp7_hi
> jPUJ5LUMGOcrtJS0tSJrwdxy8qU8ezpGq60IQ8Vt74z2UO3FTU/Direct%20Inkjet%
> 20Resist%20Printing/reg%20ink.JPG
> 
> mebo
> 
> 
> 
> 
> --- In Homebrew_PCBs@yahoogroups.com, "Stefan Trethan" 
> <stefan_trethan@g...> wrote:
> > 
> > On Fri, 10 Dec 2004 13:46:52 -0800 (PST), pebo festus 
> <mebo31@y...>  
> > wrote:
> > 
> > >
> > > the nozzle isnt an issue except when the nozzel on a
> > > printer mounted nozzel stops up,then you have to throw
> > > away the whole printer.if the nozzel stops up on the
> > > cartrage --just get a new cartrage.believe me--i have
> > > been there.
> > > mebo
> > 
> > 
> > Yes, but there's a BUT.
> > 
> > The fixed-heads are usually piezo-jet and better quality while
> > the on-cartridge heads are thermo/bubble jet and as cheap as 
> humanly (or  
> > inhumanly) possible.
> > 
> > Piezo-jets seem more tolerant of different inks.
> > 
> > ST