Homebrew PCBs

here is a pic where i printed on a pcb.


http://f4.grp.yahoofs.com/v1/oFS6QYGAwga4EupkAfzTqr_42QCuaSsybaSdp7_hi
jPUJ5LUMGOcrtJS0tSJrwdxy8qU8ezpGq60IQ8Vt74z2UO3FTU/Direct%20Inkjet%
20Resist%20Printing/reg%20ink.JPG

mebo




--- In Homebrew_PCBs@yahoogroups.com, "Stefan Trethan" 
<stefan_trethan@g...> wrote:
> 
> On Fri, 10 Dec 2004 13:46:52 -0800 (PST), pebo festus 
<mebo31@y...>  
> wrote:
> 
> >
> > the nozzle isnt an issue except when the nozzel on a
> > printer mounted nozzel stops up,then you have to throw
> > away the whole printer.if the nozzel stops up on the
> > cartrage --just get a new cartrage.believe me--i have
> > been there.
> > mebo
> 
> 
> Yes, but there's a BUT.
> 
> The fixed-heads are usually piezo-jet and better quality while
> the on-cartridge heads are thermo/bubble jet and as cheap as 
humanly (or  
> inhumanly) possible.
> 
> Piezo-jets seem more tolerant of different inks.
> 
> ST