Homebrew PCBs

>Any suggestions on how to solve the puddling issue?

The transparencies/fine (paper/quality) setting should use the least 
amount of ink. Don't use any of the Photo media settings. Epson's 
inkjet transparencies are just standard film with a very thin absorbent 
layer on one side that scrubs off quite easily with water. However, 
it's the consistency and absorbency of this layer that makes them so 
good compared to others.

--- In Homebrew_PCBs@yahoogroups.com, "Stefan Trethan" 
<stefan_trethan@...> wrote:
>