Yahoo Groups archive
Messages
Page 90 of 109 · 5429 messages matched
2004-05-10 by Peter Connelly (Core Design Ltd.)
Yeah, it's not looking very good, is it... There are a few people that need more info/notice, especially those overseas, if it's going to happen. I wonder where Colin actually is. It's been nearly a month since we've heard from him. Hopefully we'll hear something before it's too
2004-05-09 by RY Stroh
I translate these good news for all our foreign friends --- In Fairlight-CMI@yahoogroups.com, "Jean-Bernard EMOND" wrote: > > oops...missed "D-Day minus 14" in the countdown... > > Any new from Colin ? > no... and you ? > > c'est plutot mal barré :) JB: it (the meeting) seems to
2004-05-09 by Pascal Nicot
Whaooou, c'est génial !!!; Et la version 6800, JB, c'est pour quand ??? :-)))) @+++ Pascal. Le 9 mai 04, à 16:18, Jean-Bernard EMOND a écrit : > > oops...missed "D-Day minus 14" in the countdown... > > Any new from Colin ? > no... and you ? > > c'est plutot mal barré :) > > je pr
2004-05-09 by Jean-Bernard EMOND
> oops...missed "D-Day minus 14" in the countdown... > Any new from Colin ? no... and you ? c'est plutot mal barré :) je prepart une disquette de developpement pour CMI II, IIx... avec assembleur et desassembleur 6809 de Motorola et de Fairlight, ainsi que les fichiers "Equ" et "
2004-05-09 by RY Stroh
oops...missed "D-Day minus 14" in the countdown... Any new from Colin ? RY
2004-05-07 by RY Stroh
Hi Greg, and thank you for your proposal we'll that in mind but we even don't know if the event will happen on this side of the ocean or not... I hope it will happen ,and also that we will be able to make a web cam meeting with you and our american and canadian fellows on that oc
2004-05-07 by Greg Holmes
Hi everyone, You may recall that I offered to host a meeting here near Niagara Falls, Ontario for those who can't get to England. It could be on the same day, or another day. The offer is still open, and I can move on pretty short notice. I would proceed if there were, perhaps, 5
2004-05-07 by RY Stroh
did anyone get in touch with Colin recently ? James ?
2004-05-06 by RY Stroh
Colin ?
2004-05-05 by feldmann@xs4all.nl
> sorry to insist... You are not insisting at all. I have another trip planned next week and will not be able to attend unless more info comes available soon (before this weekend). > is the meeting still planned ? > I think that all the potential attendee need to know to start >
2004-05-05 by RY Stroh
sorry to insist... is the meeting still planned ? I think that all the potential attendee need to know to start organising ( travel / hotel / etc ) Cheers to all R-Y
2004-05-04 by Hermann Seib
> You get it wrong... Here is what JB said : > > --- Quoting JB --- > > [...] > > It's really stupid, It give me more motivation to finish my > "FairlightArchive" web site with all PDF, Eprom, Pal and Gal, > for the CMI I, II, III and MFX I, II... I sure hope he really does; this
2004-05-04 by feldmann@xs4all.nl
> Hi All, > > You get it wrong... Here is what JB said : Thank you Laurent ! :) I stand corrected. I misunderstood the "finish" part. Harald. > --- Quoting JB --- > > I'm seek of the scam auctions... on E-Bay ! > It's really stupid, It give me more motivation to finish my > "Fair
2004-05-04 by Laurent Lemaire
Hi All, You get it wrong... Here is what JB said : --- Quoting JB --- I'm seek of the scam auctions... on E-Bay ! It's non-sense ! Doing business with anything... + wonderfull non-original documentation for Fairlight C.M.I. modeles : I, II, IIX, III. MFX modeles : I, II. It remin
2004-05-04 by Peter Connelly (Core Design Ltd.)
Blimey! I can understand JB getting upset over this. I would be too. There will always be someone somewhere trying to make a few quid from someone else's efforts. It's wrong, but it happens. JB - I think Haralds suggestion is great. You should advertise your service for free on e
2004-05-04 by feldmann@xs4all.nl
Well, Jean-Bertrand is very upset over the fact that again someone is selling documentation that most likely he has scanned and offered for free on his website. It reminds him of the time a Dutchman (someone from Holland) offered him his own documentation for money, after the Dut
2004-05-04 by Peter Connelly (Core Design Ltd.)
Hi Harald, what does this say? Babel doesn't translate it very well... Cheers, Peter -----Original Message----- From: feldmann@xs4all.nl [mailto:feldmann@xs4all.nl] Sent: 04 May 2004 11:04 To: Fairlight-CMI@yahoogroups.com Subject: Re: [Fairlight-CMI] Real Fairlight Bargain on Eb
2004-05-04 by feldmann@xs4all.nl
JB, It would be a pity if you removed the information from your site. But I can understand if you do. Some people will allways do this, they make a profit from someomne else's work. Just like thieves. The best way to ruin their business is to spread the information for free and m
2004-05-04 by Jean-Bernard EMOND
j'en ai marre de ces arnaques... sur Ebay ! n'importe quoi ! faire du fric avec n'importe quoi... + magnifique documentation photocopié des Fairlight C.M.I. modeles : I, II, IIX, III. MFX modeles : I, II. ca me rappel un type en Hollande qui quelques mois apres que j'ai scanné le
2004-05-03 by RY Stroh
Hi every one, Hi Colin, Is the Fairlight meeting still planned for May 22nd ? Any Info ? Cheers to all R-Y
2004-05-03 by RY Stroh
real photocopies of manuals....buy it now for 300$ only !; http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=3722123078 YeaH !
2004-05-01 by Peter
Sorry, I missed out the 5 at the end, the Subject header has now been corrected. Item #3720981095 Cheers, Peter --- In Fairlight-CMI@yahoogroups.com, feldmann@x wrote: > On Fri, 30 Apr 2004 14:14:29 +0100, "Peter Connelly \(Core Design > Ltd.\)" wrote: > > >I've got my eye on an
2004-04-30 by feldmann@xs4all.nl
On Fri, 30 Apr 2004 14:14:29 +0100, "Peter Connelly \(Core Design Ltd.\)" wrote: >I've got my eye on an item on eBay but unfortunately the seller will only ship within the US and Canada. I can't find it, is it sold already ? Where's the seller located ? >Is there anyone on this l
2004-04-30 by Peter Connelly (Core Design Ltd.)
PS - I'm going away until Tuesday morning, so I won't pick any of my emails until then. Cheers, Peter > -----Original Message----- > From: Peter Connelly (Core Design Ltd.) > Sent: 30 April 2004 14:14 > To: Fairlight CMI - Yahoo Groups (E-mail) > Subject: O/T: Roland MPG80 (item
2004-04-30 by Peter Connelly (Core Design Ltd.)
Hi, I've got my eye on an item on eBay but unfortunately the seller will only ship within the US and Canada. Is there anyone on this list that would be willing to receive this item from the seller then shiping it onto me (I'm based in the UK)? Of course, I would cover all P&P and
2004-04-28 by Peter Connelly (Core Design Ltd.)
Cheers Aaron. I got through to him this morning on his new address :-) -----Original Message----- From: Eight to Infinity (Arron) [mailto:arron@8inf.com] Sent: 28 April 2004 15:08 To: Fairlight-CMI@yahoogroups.com Subject: [Fairlight-CMI] From peter Weik Hi there, Ive just been c
2004-04-28 by Eight to Infinity (Arron)
Hi there, Ive just been corresponding with Peter on his new email address, and he asked me to pass along the following message : "I've had nightmares with my email down here in Sydney, and have subsequently lost all my old email contacts. Also, I can't even post to the Yahoo Fair
2004-04-27 by Kevin Kelley
Well I have been thinking long and hard and My IIx does not get enough attention these days and I am thinking of selling it. I just dont have the time to play anymore and I would like to see some of my collection go to a really good home. The IIx is in great physical condition bo
2004-04-26 by David J. Wilson
yes, Peter is in Australia full-time now. I've had recent conversation with him as I ordered a bunch of Series III spare boards & FCN field-change service documentation from him. Peter said that he is swamped and busy with his new job in a Sydney recording studio with the latest
2004-04-26 by Christophe Janot
I confirm this is the email address I'm using. Le 26 avr. 04, à 17:59, Eight to Infinity (Arron) a écrit : > There is new contact information on the webpage at > www.horizontal.co.uk : > > "Horizontal Productions' home is now in Sydney, Australia with a > dedicated CMI office, an
2004-04-26 by Peter Connelly (Core Design Ltd.)
Ah, it must've changed in the last 2 weeks then. The one I have is horiprod@blueyonder.co.uk Again though, I did get delivery receipts and even one read receipt for the ones I recently sent, just no reply. Anyway, there's probably some logical explanation. I'd appreciate it if yo
2004-04-26 by feldmann@xs4all.nl
Hello all, For that matter, I am trying to contact Peter Williams who sold me his Series III / MFX2. He still would ship me his optical drive and disks (since november 2003). I get no replies to my e-mails to him either. Given the fact that he is no stranger to some of the forum,
2004-04-26 by Eight to Infinity (Arron)
There is new contact information on the webpage at www.horizontal.co.uk : "Horizontal Productions' home is now in Sydney, Australia with a dedicated CMI office, and a room full of spares, documentation, and testbeds... You can contact us via any of the following methods: e-mail :
2004-04-26 by Christophe JANOT
I'm trying to get in touch with Peter but I'm finding it impossible. I've emailed him quite a few times over for the last few weeks, regarding some outstanding issues with my Fairlight upgrade/service, but he isn't replying. He did reply to begin with, but all of a sudden he's we
2004-04-26 by Peter Connelly (Core Design Ltd.)
I'm trying to get in touch with Peter but I'm finding it impossible. I've emailed him quite a few times over for the last few weeks, regarding some outstanding issues with my Fairlight upgrade/service, but he isn't replying. He did reply to begin with, but all of a sudden he's we
2004-04-22 by bangrockstogether
Hi All, For those who use the "Cmi Control" Windows keyboard interface, there is a new version available at: http://members.ozemail.com.au/~slogan/ Not much has changed. No new features - just fixes to the Com ports and 'Merge' mode. Cheers! Steve
2004-04-22 by titojay02
Hi Peter, If you use CMI Explorer in "read only" mode, you should be safe to use your external HD. This would allow you to copy and audition sounds from your HD to your PC. You could then also "rip" an image of your Fairlight hard drive to your PC and play around with writing fil
2004-04-21 by Peter Connelly (Core Design Ltd.)
Hi Rob, Got ya! I'm glad that got cleared up before I connected. At the moment, I don't have any expandable drives unfortunately. My external drive has a shed load of libraries on it... I suppose I could buy another compatible external HD and house it in the unit Peter Wielk gave
2004-04-21 by Fairlight-CMI@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the Fairlight-CMI group. File : /Software/cmios9-1.9win.zip Uploaded by : kmi9000 Description : New cmios9 release for Windows(R) NT/2000/XP (console application): full
2004-04-20 by David J. Wilson
I have two ADAPTEC 2940 cards, these are IMHO the most popular of PCI-bus SCSI cards for PC's. the external cable is 50-pin high-density SCSI-2 on the end that connects to ADAPTEC 2940 card. the other end of the cable can be either CENTRONICS or high-density SCSI-2, it all depend
2004-04-20 by titojay02
Hi Peter, To clarify, CMI Explorer will only read and write Fairlight drives/discs that are connected to your PC - you cannot currently connect the Fairlight mainframe itself to the PC. Therefore, using an external hard drive with expendable data on it is what I recommend. Please
2004-04-20 by Peter Connelly (Core Design Ltd.)
Excellent. I will try the 2940 I have installed. Either that or an older 1505/10 I have knocking about somewhere... Cheers, Peter -----Original Message----- From: feldmann@xs4all.nl [mailto:feldmann@xs4all.nl] Sent: 20 April 2004 13:00 To: Fairlight-CMI@yahoogroups.com Subject: R
2004-04-20 by feldmann@xs4all.nl
> Do I need any particular SCSI card/cables to connect my Fairlight to a PC? > I assume a Centronics 50 Pin - SCSI 2 plugged into any SCSI card will > work, for example? I'm pretty sure a Future Domain external connector will not work, because it (seemingly) has a different pin l
2004-04-20 by Peter Connelly (Core Design Ltd.)
Do I need any particular SCSI card/cables to connect my Fairlight to a PC? I assume a Centronics 50 Pin - SCSI 2 plugged into any SCSI card will work, for example? Kind regards, Peter
2004-04-20 by Laurent Lemaire
Hi Colin, I had a discussion yesterday with the other froggies about the Fairlight Meeting you're organizing in London. We're all interested to join and participate but we need some complementary info to finalize our decision. - The date is the key element: some of us may not be
2004-04-20 by feldmann@xs4all.nl
> Ah. I take it thought the 250MB tape will still only stream 60MB on the > Fairlight though? There is a possibility that the tape not only can store more bits per inch, but also has a longer length, so maybe you can store 90 or 120 Mb on it. It would save you a few pounds, in mo
2004-04-20 by Peter Connelly (Core Design Ltd.)
Ah. I take it thought the 250MB tape will still only stream 60MB on the Fairlight though? Cheers, Peter :-) -----Original Message----- From: feldmann@xs4all.nl [mailto:feldmann@xs4all.nl] Sent: 20 April 2004 10:10 To: Fairlight-CMI@yahoogroups.com Subject: RE: [Fairlight-CMI] 8"
2004-04-20 by feldmann@xs4all.nl
> HI Harald, > > What are the differences between these two models? > > Cheers, > Peter DC600A is a 60 Mb cartridge, with tape designed to hold 60 Mb. DC6250 is a cartridge which is physically idential to the DC600A, but carries tape that could hold up to 250 Mb of data. Basicall
2004-04-20 by Peter Connelly (Core Design Ltd.)
HI Harald, What are the differences between these two models? Cheers, Peter -----Original Message----- From: feldmann@xs4all.nl [mailto:feldmann@xs4all.nl] Sent: 17 April 2004 18:42 To: Fairlight-CMI@yahoogroups.com Subject: Re: [Fairlight-CMI] 8" Drive on Series III On Thu, 15 A
2004-04-17 by feldmann@xs4all.nl
On Fri, 16 Apr 2004 18:35:39 -0000, "Colin Ross" wrote: >back to me when it suits for all the French crew for the 2004 >meeting I want you all there. then I can name the meeting place in >London. Dare I guess it will not be *East* of Eden ? (hint) Harald.