Doepfer

Hello!  


Could one of you synth gurus explain what the new Blacet Research 
module does?  Thanks a ton!  http://www.blacet.com/


- Bret

Hi Bret,

> Could one of you synth gurus explain what the new Blacet Research 
> module does?  Thanks a ton!  http://www.blacet.com/

It's not exactly very clear by the description, is it? My guess is 
that it is rather like the A-115, only intended for clock/CV signals 
rather than audio. Basically take in a clock signal (or use the 
internal one), and divide this down by the various amounts, 2, 
4,...,64. Then you can add them back up, but at different amplitudes, 
and you can also invert the divided signal too. The end result will 
be a complex 'stepped' signal, depending on the relative sizes of all 
the components contributing to the whole. Feed this into a quantiser 
and thence VCO and you get pretty weird note sequences I guess. Not 
sure about the 'lag' function though.

You should be able to get something similar by adding various amounts 
of the A-160 outputs using a mixer, and possibly an inverter or two. 
The A-115 could possibly be made to do something similar, but would 
require making it output much lower frequency signals by removing a 
capacitor - I shall have a look at both!

Tim

check out the info on the Digital pattern generator at the bottom of the old
stuff page:
http://www.blacet.com/cool.html

the BZ is an updated version of this.
best,
phil