Doepfer

> -----Original Message-----
> From: Heath Teasdale [mailto:heath@ukgateway.net] 
> Sent: Monday, December 02, 2002 6:03 PM
> To: Doepfer_a100@yahoogroups.com
> Subject: [Doepfer_a100] Analogue Solutions VU Meter
> 
> 
> After about 4 years of playing with a basic 6U system, I've finally 
> managed to pursuade the 'boss' that I need another 6U.  I'm keen on 
> including the Analogue Solutions VU Meter (VU01) as part of this - 
> I'd pretend that I'm planning on using it for some higher scientific 
> sound analysis and generation purpose but I'd be lying - I just think 
> it'll look cool and evoke memories of VCS3s!  Since Doepfer don't 
> make a VU meter (yet! - I voted in the polls), the AS version seems 
> to be the best option.  I am, however, a complete electonics imbecile 
> and I don't know whether I need a different power supply, connectors 
> etc. - if the answer is a soldering iron then I'm a gonna!!  Can 
> anyone out there give me advice on whether/how I can include this AS 
> module in a Doepfer rack?
> 
> Thanks, Heath
> 
> 
> To unsubscribe from this group, send an email to: 
> doepfer_a100-unsubscribe@yahoogroups.com
> 
>  
> 
> Your use of Yahoo! Groups is subject to 
> http://docs.yahoo.com/info/terms/ 
> 
> 
>

> hi list,
> the analogue solutions VU meter doesn't need any power
> at all!
> bakis.
> 
> 
> 
> --- unknown freak <cgraef@n...> wrote:
> > Many of those Solutions modules live happily in the
> > Doepfer rack with no
> > 5V power adapter.  Some need the adapter.  But the
> > adapter's really
> > nothing more than a little thingy with a heat sink
> > attached, that you
> > plug into the Doepfer power bus -- couldn't be
> > easier.  Just check
> > whether the VU module needs the adapter.
> > 
> > > -----Original Message-----
> > > From: Heath Teasdale [mailto:heath@u...] 
> > > Sent: Monday, December 02, 2002 6:03 PM
> > > To: Doepfer_a100@y...
> > > Subject: [Doepfer_a100] Analogue Solutions VU
> > Meter
> > > 
> > > 
> > > After about 4 years of playing with a basic 6U
> > system, I've finally 
> > > managed to pursuade the 'boss' that I need another
> > 6U.  I'm keen on 
> > > including the Analogue Solutions VU Meter (VU01)
> > as part of this - 
> > > I'd pretend that I'm planning on using it for some
> > higher scientific 
> > > sound analysis and generation purpose but I'd be
> > lying - I just think 
> > > it'll look cool and evoke memories of VCS3s! 
> > Since Doepfer don't 
> > > make a VU meter (yet! - I voted in the polls), the
> > AS version seems 
> > > to be the best option.  I am, however, a complete
> > electonics imbecile 
> > > and I don't know whether I need a different power
> > supply, connectors 
> > > etc. - if the answer is a soldering iron then I'm
> > a gonna!!  Can 
> > > anyone out there give me advice on whether/how I
> > can include this AS 
> > > module in a Doepfer rack?
> > > 
> > > Thanks, Heath
> > > 
> > > 
> > > To unsubscribe from this group, send an email to: 
> > > doepfer_a100-unsubscribe@y...
> > > 
> > >  
> > > 
> > > Your use of Yahoo! Groups is subject to 
> > > http://docs.yahoo.com/info/terms/ 
> > > 
> > > 
> > > 
> > 
> > 
> 
> 
> =====
> synthfreak(parallel worlds)
> athens-greece
> [Doepfer_a100] group owner-moderator
> 
> __________________________________________________
> Do you Yahoo!?
> Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
> http://mailplus.yahoo.com