Doepfer

Many of those Solutions modules live happily in the Doepfer rack with no
5V power adapter.  Some need the adapter.  But the adapter's really
nothing more than a little thingy with a heat sink attached, that you
plug into the Doepfer power bus -- couldn't be easier.  Just check
whether the VU module needs the adapter.

> -----Original Message-----
> From: Heath Teasdale [mailto:heath@ukgateway.net] 
> Sent: Monday, December 02, 2002 6:03 PM
> To: Doepfer_a100@yahoogroups.com
> Subject: [Doepfer_a100] Analogue Solutions VU Meter
> 
> 
> After about 4 years of playing with a basic 6U system, I've finally 
> managed to pursuade the 'boss' that I need another 6U.  I'm keen on 
> including the Analogue Solutions VU Meter (VU01) as part of this - 
> I'd pretend that I'm planning on using it for some higher scientific 
> sound analysis and generation purpose but I'd be lying - I just think 
> it'll look cool and evoke memories of VCS3s!  Since Doepfer don't 
> make a VU meter (yet! - I voted in the polls), the AS version seems 
> to be the best option.  I am, however, a complete electonics imbecile 
> and I don't know whether I need a different power supply, connectors 
> etc. - if the answer is a soldering iron then I'm a gonna!!  Can 
> anyone out there give me advice on whether/how I can include this AS 
> module in a Doepfer rack?
> 
> Thanks, Heath
> 
> 
> To unsubscribe from this group, send an email to: 
> doepfer_a100-unsubscribe@yahoogroups.com
> 
>  
> 
> Your use of Yahoo! Groups is subject to 
> http://docs.yahoo.com/info/terms/ 
> 
> 
>