Doepfer

>
> IIRC, the range of the bottom A155 cv row is from 0 to +7 volts.
> 
> Â 
> Bakis 
> 
> 
> ________________________________
>  From: Raul <raulpena1974@...>
> To: Doepfer_a100@yahoogroups.com 
> Sent: Monday, July 16, 2012 11:27 PM
> Subject: [Doepfer_a100] Doepfer A155 post out CV values (differences)?
>  
> 
> Â  
> I'm trying to get a grasp on the values coming out from the a155. 
> At post out 1(upper) its clearly labeled 1v-2v-4v. so a mx range of 4 octaves. 
> 
> I assumed that the Scale dial on the lower row Had the same minimum and maximum values as the top row just another set. But not so. 
> 
> What is the min and max values that Scale creates? 
> I could not find it in the manual, unless I missed it. 
> Or is that bottom row 1 or two octaves down? it sounds that way to my ear. 
> 
> Any help in understanding this would be greatly appreciated. 
> 
> All the best. 
> 
> Raul
> 
> 
>  
> 
> [Non-text portions of this message have been removed]
>

 From: Raul <raulpena1974@yahoo.com>
To: Doepfer_a100@yahoogroups.com 
Sent: Monday, July 16, 2012 11:27 PM
Subject: [Doepfer_a100] Doepfer A155 post out CV values (differences)?
 

  
I'm trying to get a grasp on the values coming out from the a155. 
At post out 1(upper) its clearly labeled 1v-2v-4v. so a mx range of 4 octaves. 

I assumed that the Scale dial on the lower row Had the same minimum and maximum values as the top row just another set. But not so. 

What is the min and max values that Scale creates? 
I could not find it in the manual, unless I missed it. 
Or is that bottom row 1 or two octaves down? it sounds that way to my ear. 

Any help in understanding this would be greatly appreciated. 

All the best. 

Raul


 

[Non-text portions of this message have been removed]

 From: Raul <raulpena1974@yahoo.com>
To: Doepfer_a100@yahoogroups.com 
Sent: Tuesday, July 17, 2012 12:56 AM
Subject: [Doepfer_a100] Re: Doepfer A155 post out CV values (differences)?
 

  
So would that be an overall range of 7 octaves over the 0-10 range on the dial labeled scale?

Thanks for the quick reply.

Raul

--- In Doepfer_a100@yahoogroups.com, Bakis Sirros <synth_freak_2000@...> wrote:
>
> IIRC, the range of the bottom A155 cv row is from 0 to +7 volts.
> 
> Â 
> Bakis 
> 
> 
> ________________________________
>  From: Raul <raulpena1974@...>
> To: Doepfer_a100@yahoogroups.com 
> Sent: Monday, July 16, 2012 11:27 PM
> Subject: [Doepfer_a100] Doepfer A155 post out CV values (differences)?
> 
> 
> Â  
> I'm trying to get a grasp on the values coming out from the a155. 
> At post out 1(upper) its clearly labeled 1v-2v-4v. so a mx range of 4 octaves. 
> 
> I assumed that the Scale dial on the lower row Had the same minimum and maximum values as the top row just another set. But not so. 
> 
> What is the min and max values that Scale creates? 
> I could not find it in the manual, unless I missed it. 
> Or is that bottom row 1 or two octaves down? it sounds that way to my ear. 
> 
> Any help in understanding this would be greatly appreciated. 
> 
> All the best. 
> 
> Raul
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
>


 

[Non-text portions of this message have been removed]