Doepfer

woops! Dieter seems to have already addressed this. Interesting, I 
wasn't thinking about using a protection resistor.

Joe
--- In Doepfer_a100@yahoogroups.com, "Joe Buechler" <buechlerjoe@t...> 
wrote:
> I'm been thinking about modifing my A138a mixers so that channel 4 
is 
> normalled to the fixed voltage from the power supply, and you'd 
> be able to adjust the offset voltage with the channel knob, but it 
> would work like a regular mixer channel if you plugged in a patch 
> cable.
> 
> Joe
> 
> --- In Doepfer_a100@yahoogroups.com, "code_pig" <code_pig@y...> 
wrote:
> > Actually, I just wanted a dual offset module because I really 
don't 
> > need (or have room for) and A129/3.  
> > 
> > I mean, I don't want to whine, but I really don't think it should 
be 
> > necessary for one to purchase the A129/3 (which really can't be 
> fully 
> > expolited without the A129/4 Controller) when all one may need is 
a 
> > couple of offset generators.
> > 
> > Regards,
> > Kevin
> > 
> > --- In Doepfer_a100@yahoogroups.com, "jmaddocks1975" 
> > <jmaddocks1975@y...> wrote:
> > > Hi,
> > > I agree, this is something I am looking at building.
> > > My a129 never gets used and I really want a fixed filter, so if 
I 
> > can 
> > > make a module with 15 pots to control the a129/2 I got one.
> > > Any ideas of best way to make it?
> > > 
> > > John
> > > --- In Doepfer_a100@yahoogroups.com, "pstnotpd" <psm@w...> 
wrote:
> > > > Wouldn't that be fairly easy to make yourself? A number of 
pots 
> > 15 
> > > > running from the internal power. Something like a CV source+ 
so 
> > > that 
> > > > the 129 could be used as a filter bank, but much cheaper an 
> space 
> > > > consuming. 
> > > > Or am I getting you wrong?
> > > > 
> > > > 
> > > > --- In Doepfer_a100@yahoogroups.com, "code_pig" 
<code_pig@y...> 
> > > wrote:
> > > > > This might have already been discussed, but...
> > > > > 
> > > > > I know the A129/3 does offsets, but might there be room for 
> > > > something 
> > > > > like a simple dual offset generator module?
> > > > > 
> > > > > Regards,
> > > > > Kevin