Doepfer

I'm been thinking about modifing my A138a mixers so that channel 4 is 
normalled to the fixed voltage from the power supply, and you'd 
be able to adjust the offset voltage with the channel knob, but it 
would work like a regular mixer channel if you plugged in a patch 
cable.

Joe

--- In Doepfer_a100@yahoogroups.com, "code_pig" <code_pig@y...> wrote:
> Actually, I just wanted a dual offset module because I really don't 
> need (or have room for) and A129/3.  
> 
> I mean, I don't want to whine, but I really don't think it should be 
> necessary for one to purchase the A129/3 (which really can't be 
fully 
> expolited without the A129/4 Controller) when all one may need is a 
> couple of offset generators.
> 
> Regards,
> Kevin
> 
> --- In Doepfer_a100@yahoogroups.com, "jmaddocks1975" 
> <jmaddocks1975@y...> wrote:
> > Hi,
> > I agree, this is something I am looking at building.
> > My a129 never gets used and I really want a fixed filter, so if I 
> can 
> > make a module with 15 pots to control the a129/2 I got one.
> > Any ideas of best way to make it?
> > 
> > John
> > --- In Doepfer_a100@yahoogroups.com, "pstnotpd" <psm@w...> wrote:
> > > Wouldn't that be fairly easy to make yourself? A number of pots 
> 15 
> > > running from the internal power. Something like a CV source+ so 
> > that 
> > > the 129 could be used as a filter bank, but much cheaper an 
space 
> > > consuming. 
> > > Or am I getting you wrong?
> > > 
> > > 
> > > --- In Doepfer_a100@yahoogroups.com, "code_pig" <code_pig@y...> 
> > wrote:
> > > > This might have already been discussed, but...
> > > > 
> > > > I know the A129/3 does offsets, but might there be room for 
> > > something 
> > > > like a simple dual offset generator module?
> > > > 
> > > > Regards,
> > > > Kevin