Doepfer

the official language of this group is English.
thank you,Bakis.

 

      From: "Alexander Wassermann aua130@yahoo.de [Doepfer_a100]" <Doepfer_a100@yahoogroups.com>
 To: Doepfer_a100@yahoogroups.com 
 Sent: Saturday, April 30, 2016 8:12 AM
 Subject: Re: AW: [Doepfer_a100] A-113
   
    OK, Danke Dieter.
Dann bringe ich das Modul nach Gräfelfing, ich wohne nicht weit weg.
BG,Alex

Von meinem iPad gesendet
Am 29.04.2016 um 10:08 schrieb yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com>:


    > Hi group,
>
> I haven't used my sub harmonic oscillator for some time but reinstalled it recently, albeit without success. First I
> thought I had an issue with the 5 V but that was not the problem. I just cannot get any sound out of the single or mix
> output, no matter what I feed into the input and which divider settings I use. If I crank the volume up I can barely hear
> some oscillation sound, also the effect of altering the divisions but always with one stable frequency dominating (again,
> no matter what the input frequency identification, or what the divider settings are).
>
> Any ideas or should I send the module in for inspection?
>
> Best regards,
> Alex

Sorry for the troubles with the module. If the +5V are OK the module has to be repaired (but only the old version of the module with
16 pin bus connector required the +5V). For details please refer to the repair notes on the FAQ page of our website.
Maybe the processor is defective (but that's only a guess). But in this case the display and the buttons would not work anymore. If
the display and the buttons are still working it's another fault.

Best wishes
Dieter Doepfer