Doepfer

OK, Danke Dieter.

Dann bringe ich das Modul nach Gräfelfing, ich wohne nicht weit weg.

BG,
Alex

Von meinem iPad gesendet

> Am 29.04.2016 um 10:08 schrieb yahoo@doepfer.de [Doepfer_a100] <Doepfer_a100@yahoogroups.com>:
> 
> > Hi group,
> >
> > I haven't used my sub harmonic oscillator for some time but reinstalled it recently, albeit without success. First I
> > thought I had an issue with the 5 V but that was not the problem. I just cannot get any sound out of the single or mix
> > output, no matter what I feed into the input and which divider settings I use. If I crank the volume up I can barely hear
> > some oscillation sound, also the effect of altering the divisions but always with one stable frequency dominating (again,
> > no matter what the input frequency identification, or what the divider settings are).
> >
> > Any ideas or should I send the module in for inspection?
> >
> > Best regards,
> > Alex
> 
> Sorry for the troubles with the module. If the +5V are OK the module has to be repaired (but only the old version of the module with
> 16 pin bus connector required the +5V). For details please refer to the repair notes on the FAQ page of our website.
> Maybe the processor is defective (but that's only a guess). But in this case the display and the buttons would not work anymore. If
> the display and the buttons are still working it's another fault.
> 
> Best wishes
> Dieter Doepfer
> 
>