Doepfer

Hello Bakis,

thanks for forwarding
Hello

Am 23.11.2012 13:07, schrieb Bakis Sirros:
> Dieter says:
>
> "...he available 10 outputs of the A-190-8 are not yet fixed. If
> the users think other combinations of clocks or start/stop/reset
> outputs would be better we still can change that because the outputs
> are generated by the firmware of the processor. After all it's only
> the printing at the front panel...
Checking http://www.doepfer.de/a1908.htm I find:


"
...
* Start/Stop (normal): turns to high at each Midi Start or Continue
message, turns to low at each Midi Stop message
* Start/Stop (inverse): same as above but inverted polarity
This does not make much sense, as there are easy ways to invert the signal.
...
"


Instead of this socket "St/St-inverse" I'd really vote for a pushbutton, 
which provides a "Mungo-Sync" like start-in-function.

Florian