Doepfer

Dieter says:

"The preliminary information about the A-190-8 and the A-180-2 are now
online. 
They can be found via the "A-100 new/planned" modules link. The
available 10 
outputs of the A-190-8 are not yet fixed. If the users think
other 
combinations of clocks or start/stop/reset outputs would be better we
still 
can change that because the outputs are generated by the firmware of
the 
processor. After all it's only the printing at the front panel. We
omitted 
the usual DIN SYNC socket because it's nothing new but only clock
and 
start/stop on two pins of the DIN socket. If there are sufficient
inquiries 
we may offer a special cable with two 3.5 jack plugs on one side
and a DIN 
plug on the other."

A190-8:
http://www.doepfer.de/a1908.htm

A180-2:
http://www.doepfer.de/a180.htm

also more news:
Dieter says: "In December the A-192-2 (Dual CV/Gate-to-USB/Midi interface) will be
available 
and even the hardware of polyphonic CV/Gate interface A-190-5 is
ready. 
Christian is about to program the firmware. But it takes longer than
expected 
and so the A-190-5 will be available early in 2013."

A192-2:
http://www.doepfer.de/a1922.htm

A190-5:
http://www.doepfer.de/a1905.htm


thanks,
Bakis.

 
Bakis Sirros
www. parallel - worlds - music. com
www. facebook. com/ pages/Parallel-Worlds/192093934136476
www. myspace. com/ interconnectedmusic
www. myspace. com/ memorygeist
www. DiN. org. uk
www. vu-us. com

[Non-text portions of this message have been removed]