Many thanks, that's brilliant!!! andy yahoo@doepfer.de wrote: > We have updated the technical information on our website with the details > about the pins. > > Best wishes > Dieter Doepfer > > >> -----Ursprüngliche Nachricht----- >> Von: Doepfer_a100@yahoogroups.com >> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von andy butler >> Gesendet: Mittwoch, 27. Oktober 2010 17:10 >> An: Doepfer_a100@yahoogroups.com >> Betreff: Re: : [Doepfer_a100] Dark energy external out question..Jumper >> pins and extra CV in/out >> >> >> hi Dieter, thanks again for that >> >> I've now obtained the hardware sockets to bring those Dark Energy >> jumpers out of the box. >> >> Any chance you could help to fill in some gaps? >> >> Problem I now have is that it's not always clear which pin to attach to. >> The docs often only tell which pairs of pins have to be connected, not >> which is which. >> >> I'm looking at >> >> JP6.. apply CV to mix between osc and ext. ..which pin to use? >> >> JP7.. 2 pins are LFO1 o/p and Inverter Input ..which is which? >> >> JP8.. 2 pins are Inverter o/p and to the LFO1bar socket on the >> top panel, ...which is which? >> >> >> Any hints gratefully accepted. >> >> For interest, my plan is to add 5 sockets: >> >> Outputs >> 1. ADSR >> 2. LFO1 >> 3. LFO2 >> >> Inputs >> 1. Inverter (normalled to LFO1) >> 2. VCO/ext Mix >> >> The existing LFO1bar Output on the top panel will function >> as before unless the Inverter input socket is used. >> >> >> best regards >> >> andy butler
Message
Re: AW: : [Doepfer_a100] Dark energy external out question..Jumper pins and extra CV in/out
2010-10-28 by andy butler