Doepfer

We have updated the technical information on our website with the details
about the pins.

Best wishes
Dieter Doepfer


> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von andy butler
> Gesendet: Mittwoch, 27. Oktober 2010 17:10
> An: Doepfer_a100@yahoogroups.com
> Betreff: Re: : [Doepfer_a100] Dark energy external out question..Jumper
> pins and extra CV in/out
>
>
> hi Dieter, thanks again for that
>
> I've now obtained the hardware sockets to bring those Dark Energy
> jumpers out of the box.
>
> Any chance you could help to fill in some gaps?
>
> Problem I now have is that it's not always clear which pin to attach to.
> The docs often only tell which pairs of pins have to be connected, not
> which is which.
>
> I'm looking at
>
> JP6.. apply CV to mix between osc and ext.   ..which pin to use?
>
> JP7.. 2 pins are LFO1 o/p and Inverter Input ..which is which?
>
> JP8.. 2 pins are Inverter o/p and to the LFO1bar socket on the
> top panel, ...which is which?
>
>
> Any hints gratefully accepted.
>
> For interest, my plan is to add 5 sockets:
>
> Outputs
> 1. ADSR
> 2. LFO1
> 3. LFO2
>
> Inputs
> 1. Inverter (normalled to LFO1)
> 2. VCO/ext Mix
>
> The existing LFO1bar  Output on the top panel will function
> as before unless the Inverter input socket is used.
>
>
> best regards
>
> andy butler
>
>
>
> yahoo@doepfer.de wrote:
> >> The question on my mind is whether it is a switch, or a continuous
> >> controller.
> >
> > It's not a switch but a continuous controller (a bit like the A-134 when
> > used as crossfader or input panner).
> >
> > Best wishes
> > Dieter Doepfer
> >
> >
> >
> >
> > ------------------------------------
> >
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>