Doepfer

i also put my A108 audio input (of all 3 A108's of mine) to around 9 o'clock for non-distorted input.
so, i think this behavior of the A108 is normal and not defective.


Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist

[Doepfer_a100] group owner

www. parallel - worlds - music. com

www. myspace. com/ parallelworldsmusic

www. myspace. com/ interconnectedmusic

www. myspace. com/ memorygeist

www. DiN. org. uk

www. musicamaximamagnetica. com

www. vu-us. com

--- On Fri, 3/26/10, Florian Anwander <fanwander@mnet-online.de> wrote:

From: Florian Anwander <fanwander@mnet-online.de>
Subject: Re: [Doepfer_a100] Re: A-108 opinions?
To: Doepfer_a100@yahoogroups.com
Date: Friday, March 26, 2010, 10:48 AM







 



  


    
      
      
      Hi Jari



replacing the potentiometer doesn't change anything. I don't have the 

schematics of the A108 here, but there is usually an input opamp, which 

has assumingly a too high amplification due to a defective or wrong 

feedback resistor. For dedicated error tracing some measuring equipment 

(oscilloscope, ohmmeter) and mesauring know how is needed.



I am sure Dieter will jump in soon.



Florian



jalmari3 schrieb:

> The other pots are B50K (linear?). If I swap all except Frequency pot to A50K, do I get less sensitivity at near counter clockwise position wihtout loss of range here too? Attenuating would then work like with Cwejman modules, which I prefer?    





    
     

    
    


 



  






      

[Non-text portions of this message have been removed]