2001-09-20 by Brian Mikiten
Martin - Great questions! I wrote several articles for my newsletter (years ago!) on the issue of seeing and final composition. I think that we have all come
Thread view
Attachments: 0
2001-09-20 by Carolyn Frayn
Ummmm, With Mark s Morgan Freeman and Bernd s submission, I m concerned... I m sending an image of my son. Hope no one minds... I could change it to a close
Thread view
Attachments: 0
2001-09-20 by Brian Mikiten
Jerry -
Thread view
Attachments: 0
2001-09-20 by Jerry Olson
Brian, I have only seen a half dozen or so platinum prints, and have no idea if they were high quality prints or not. There just wasn t anything approaching a
Thread view
Attachments: 0
2001-09-20 by Todd Flashner
Oops, Same in the darkroom as you, is what I meant. I didn t mean to make it sound like that comparison was original to me. Todd
Thread view
Attachments: 0
2001-09-20 by Todd Flashner
... Yes you did, thank you. BTW, I was the same way in the darkroom. I hated my friends that could shoot Plus-x, develop it in straight D-76, and some version
Thread view
Attachments: 0
2001-09-20 by Martin Wesley
Tyler, Thanks for the additional insights into your workflow. I hadn t realized that you methods gave you the ability to tweak the color of the Piezo inks.
Thread view
Attachments: 0
2001-09-20 by Shaun Granleese
Bernd - are you saying that you re going to produce a print (on one of the three papers you mentioned) AND a comparison dual-print on the EAM for EACH
Thread view
Attachments: 0
2001-09-20 by Martin Wesley
Bernd, Wow! That sounds really great. Thanks for providing the opportunity for so many to see the side-by-side comparison of Piezo, MIS FS w/Piezo driver and
Thread view
Attachments: 0
2001-09-20 by Michael J. Kravit
My 31 prints will be complete this evening. Only 11 more to go. Hmm, maybe I should reprint 3 on each of 10 different papers....or maybe one on each of 31
Thread view
Attachments: 0
2001-09-20 by Martin Wesley
Brian, I am still going through the silver-to-inkjet transition myself. Personally I always preferred smooth silver to platinum or matte silver. I have seen
Thread view
Attachments: 0
2001-09-20 by Robert Rex
This is a sad email, but i felt that this forum would be a good place to reach photographers/digital artists in the boston area. I have just found out that
Thread view
Attachments: 0
2001-09-20 by Tyler Boley
... I ask myself this regularly, and double checking against the Piezo driver is certainly something I do from time to time though I hadn t done it with Zees.
Thread view
Attachments: 0
2001-09-20 by Shaun Granleese
Arghhh! ;-) Shaun
Thread view
Attachments: 0
2001-09-20 by Maris V. Lidaka, Sr.
A .sit file is a compressed Mac file - it can be opened with Aladdin Expander on a PC http://www.aladdinsys.com/ Their Stuffit Expander is free. Maris ...
Thread view
Attachments: 0
2001-09-20 by Ruhrfoto/Bernd L.
Just finished print # 31. I printed with MIS Full Spectrum on Epson 1160 using the Epson driver. I made 11 prints on Photo Rag 10 prints on W. Turner 10
Thread view
Attachments: 0
2001-09-20 by Brian Mikiten
Jerry - No problem. I think my point should have been directed more towards the fact that I had problems warming up to piezo than anything else because
Thread view
Attachments: 0
2001-09-20 by Jerry Olson
We ll just have to agree to disagree, Brian. I also used to teach photography a long time ago (University of North Dakota). I feel my Brooks training was a
Thread view
Attachments: 0
2001-09-20 by Paul Roark
My Photoshop is not opening (or seeing) the Zees file. What is a sit file? Paul
Thread view
Attachments: 0
2001-09-20 by Jerry Olson
Ken, if you EVER find a truly satisfactory uncoated paper that gives deep blacks and smooth tones, please do tell us what it is! I ve never tried the Japanese
Thread view
Attachments: 0
2001-09-20 by Brian Mikiten
Paul - .sit is Stuff It (on the mac) and is similar to .zip on a pc - just two different programs. You can download the Unstuff It program from zdnet.com Brian
Thread view
Attachments: 0
2001-09-20 by ken@kensmithart.com
Jerry: Thank you so much for your suggestions, also Cheap Joes... There is a ton of information, and alot of friendly advice from this group...I m sure I ll
Thread view
Attachments: 0
2001-09-20 by Brian Mikiten
Jerry - I taught photography and large format workshops across the US for several years and have to completely disagree with the statements you make on the
Thread view
Attachments: 0
2001-09-20 by Todd Flashner
... Thank Tyler and Phil, Very impressive indeed. Tyler this raises some questions for me. Do you think this is enough to have you use the Piezo driver more in
Thread view
Attachments: 0
2001-09-20 by Jerry Olson
Harvey, Try to imagine one of Ansel Adams prints without a proper black. Think it would be impressive? If he just had charcoal grays where blacks should have
Thread view
Attachments: 0
2001-09-20 by Jerry Olson
Ken, are you familiar with Cheap Joes Art Supply in New York? they have about 3000 papers. I bet you can find one that will give you what you re looking for!
Thread view
Attachments: 0
2001-09-20 by Jerry Olson
Ken, try a sheet or two of Arches Bright White paper. It s uncoated, but gives a decent black. It doesn t handle really smooth tones too great, as they can
Thread view
Attachments: 0
2001-09-20 by Martin Wesley
Stumbled across an interesting post on doing a RGB profiles on the Epson-Inkjet list message #65429 from just over one year ago. From: Dan Culbertson
Thread view
Attachments: 0
2001-09-20 by Phil Bard
I m particularly curious to hear how well ... I just tried it on an 1160 using EAM with Piezo inks and the new driver (which has a profile for EAM). Every
Thread view
Attachments: 0
2001-09-20 by SKID Photography
I think it s unfortunate that you seem to have such a limited view of what can comprise a beautiful image. To be hemmed in by perfect black and pure white
Thread view
Attachments: 0
2001-09-20 by Tyler Boley
... It never occurred to me to try it since I rarely use it. You peaked my curiousity so I tried it with a 3000 on EAM with the new EAM profile. Pretty
Thread view
Attachments: 0
2001-09-20 by Todd Flashner
While tweaking some curves, and checking out some of the grayscale gradients I ve collected over the past few months I finally gave a serious look at Tyler s
Thread view
Attachments: 0
2001-09-20 by ken@kensmithart.com
Robert: Well, besides the tactileness, my reason for uncoated papers is that they are deckled...I want it for it s presentation, some ideas I have. But, coated
Thread view
Attachments: 0
2001-09-20 by Robert Morrison
I like the nudes Ken. I think these images could work on uncoated paper, but the blacks won t be there unless you coat the final print...which if you are using
Thread view
Attachments: 0
2001-09-20 by ken@kensmithart.com
Paul: Your willingness to answer questions with this inkset, encourages me somehow to keep trying it with the uncoated papers that I like. That may seem
Thread view
Attachments: 0
2001-09-20 by ken@kensmithart.com
Yeah, it s a love fest.... Somewhere I read that s what making art is all about. Steve, you are too modest! And, you are encouraging in that you also are
Thread view
Attachments: 0
2001-09-20 by Tyler Boley
... Steve is too modest to mention that he is also represented by this gallery, and definitly has something unique to offer. Yup, up here in the Northwest,
Thread view
Attachments: 0
2001-09-20 by sdmey4@aol.com
Its a little late, but you all just Missed Ken Smiths exhibit at the Benham Gallery Seattle. It came down Last weekend. You don t get in this gallery unless
Thread view
Attachments: 0
2001-09-19 by thm@bellsouth.net
Martin: Thank you for your thoughtful reply to my questions on MIS and Piezo - same goes for the information posted by others. You asked about the MIS B-Curve
Thread view
Attachments: 0
2001-09-19 by Martin Wesley
Mark, Done. Under Files Ink Data. Added Mikes second post, your comments and my own. Martin ... wrote: (snip) ... (snip)
Thread view
Attachments: 0
2001-09-19 by Martin Wesley
Ken, Very nice post and a wonderful website. I took the liberty of adding it to the Group s Bookmarks under Photographers Your remarks underscore the
Thread view
Attachments: 0
2001-09-19 by Jennifer Drucker
I am scanning at 2000... Ed from VueScan suggested I try to upgrade which is what I will do. Hopefully it will work. - Jennifer ... From: Martin Wesley To:
Thread view
Attachments: 0
2001-09-19 by Tyler Boley
... Thank you for sharing your site with us Ken, and I agree with your thoughts. It s interesting that we have seen some of each others prints, have very
Thread view
Attachments: 0
2001-09-19 by Steadman Uhlich
I think Ken does produce Perfect Prints...to his own aesthetic senibility...and I like them very much. I agree with Tyler and Ken too that there are many
Thread view
Attachments: 0
2001-09-19 by Todd Flashner
... GORGEOUS! Todd
Thread view
Attachments: 0
2001-09-19 by ken@kensmithart.com
Jerry, When I look at the surface of uncoated paper, such as somerset velvet, with an 8X agfalupe, I see what I would describe as hairs on the surface. These
Thread view
Attachments: 0
2001-09-19 by meander@mail.dk
... FWIW, I also think Ken should post his URL, I think the images there are real eye openers. Jerry.
Thread view
Attachments: 0
2001-09-19 by ken@kensmithart.com
Hi Tyler: I thought the discussions of this post might cause us to explore what we re each trying to do with our work...to challenge us and make us better
Thread view
Attachments: 0
2001-09-19 by Jerry Olson
Ken, To me, if a print doesn t have a satisfying black, it s a failure, unless it is an obvious high key print. It the deepest black in most landscapes is only
Thread view
Attachments: 0
2001-09-19 by Tyler Boley
... It is certainly possible to get the same results on coated paper. If you are implying that these results are always achieved with uncoated papers, I can
Thread view
Attachments: 0