Digital BW, The Print

Like Pierre, I've got very good luck with OctoInkjet tanks. The owner is very pleasant to deal with, conscientious and personable - not to mention a well-engineered product.

Paul

--- In DigitalBlackandWhiteThePrint@yahoogroups.com, "Un Globe Trotteur" <unglobetrotteur@...> wrote:
>
> Just caught this thread in the middle. If you are looking for a waste tank, I got one for my 2000 a few years back from this British company:
> http://www.octoink.co.uk/
> 
> I live in the state and it took less than a week to arrive. It is very well built. I got the solo plus waste tank.
> Pierre
> http://www.PierreOlivierTavernier.com
> 
> 
> From: MyronG 
> Sent: Saturday, July 20, 2013 8:57 PM
> To: DigitalBlackandWhiteThePrint@yahoogroups.com 
> Subject: [Digital BW] Re: Found: waste tank resetter for Epson 3800/3880
> 
>   
> 
> 
> I can't recall where I got mine, but I think it was simply the chip resetter for a 3880.
> 
> I took the stuffing out of a used waste tank, drilled a small hole near the bottom, front of the tank, glued a rigid plastic tube into the hole and ran a flexible tube from that down to a gallon plastic juice container secured to the side of the printer stand. Every once in a while I need to reset the chip, and eventually I will need to replace the container. ...It's pretty frightening to see how much ink goes "down the drain", so to speak.
> 
> 
> 
> 
> 
> [Non-text portions of this message have been removed]
>