Digital BW, The Print

Just caught this thread in the middle. If you are looking for a waste tank, I got one for my 2000 a few years back from this British company:
http://www.octoink.co.uk/

I live in the state and it took less than a week to arrive. It is very well built. I got the solo plus waste tank.
Pierre
http://www.PierreOlivierTavernier.com


From: MyronG 
Sent: Saturday, July 20, 2013 8:57 PM
To: DigitalBlackandWhiteThePrint@yahoogroups.com 
Subject: [Digital BW] Re: Found: waste tank resetter for Epson 3800/3880

  


I can't recall where I got mine, but I think it was simply the chip resetter for a 3880.

I took the stuffing out of a used waste tank, drilled a small hole near the bottom, front of the tank, glued a rigid plastic tube into the hole and ran a flexible tube from that down to a gallon plastic juice container secured to the side of the printer stand. Every once in a while I need to reset the chip, and eventually I will need to replace the container. ...It's pretty frightening to see how much ink goes "down the drain", so to speak.





[Non-text portions of this message have been removed]