Re: [DW8000] Re: greetings DW-8000 USERS..
2011-01-02 by James Reeno
Thanks for that joe, however the dw does not output it s parameter data. I tested it. REENO Funky music For The New Millenium WWW.SPAZZOID.COM (Where music
Yahoo Groups archive
Archive for DW8000.
Messages
Page 7 of 24 · 1184 messages matched
2011-01-02 by James Reeno
Thanks for that joe, however the dw does not output it s parameter data. I tested it. REENO Funky music For The New Millenium WWW.SPAZZOID.COM (Where music
2011-01-01 by joe peak
You can use midiox to view all data being sent out of any midi device. A good tool to see whats going on... http://www.midiox.com/
2011-01-01 by James Reeno
Greetings ! Is there a way that the dw can send midi parameter data OUT, so that I can program my MIDI hardware controller to program it from? REENO Funky
2011-01-01 by Royce
Hi James sorry about deleting the message. Post New Year s effect I think. ... Check out the Yahoo BC2000 group. I wrote a preset for the DW6000 and a few have
2011-01-01 by Royce
(Sorry I accidentally deleted this message from jamesreno@yahoo.com - Royce) I love this synth. I ve only had it for about 8 months, but i m in love with that
2010-12-12 by arthur
im looking for a dw8000 paper manual with full sized schematics for a rresonable price.
2010-12-03 by silvercreekvalley
Thanks for the info. The midi kit I have installed was basically the same note on/off etc, but it was useful from time to time. I didnt know about the
2010-12-03 by plastikanimal
It might be cheaper and safer to just buy a new MIDI interface. Well maybe not cheaper. I would shop around first because MIDI kits can be pricey and the
2010-12-01 by silvercreekvalley
Ive finally decided to try and replace my poly 61 with a poly 61m if I can find one :) I ve had a poly 61 for a long time, and this was fitted with an unknown
2010-10-25 by Doug
Marco, I m not sure how keys are assigned in software, but try this with keys that seem to be OK: With a long sustain turned ON, play eight notes (say a 2
2010-10-24 by Eric Hall
Keep us posted. ... From: Marco Ballini Subject: Re: [DW8000] keyboard problems To: DW8000@yahoogroups.com Date: Sunday, October 24,
2010-10-24 by Marco Ballini
I checked it in unison mode: it really seems that it s (mostly) always the same keys that show the problem (they don t make any sound). However, the same keys,
2010-10-24 by Russ Rose
the way to resolve key or voice on this model is to put the oscillators in the mono mode by pressing the unison switch. then each time you press a key, you
2010-10-24 by Ballini
Hi all! I own a DW-8000, which I recently bought on eBay. Unfortunately few keys of the keyboard seem not respond. Sometimes, pressing harder (or faster?),
2010-09-21 by Russ Rose
be specific please
2010-09-21 by arthurok
do you have parts for a dw8000? ... From: Russ Rose To: DW8000@yahoogroups.com Sent: Monday, September 20, 2010 5:49 PM Subject: Re: [DW8000] poly 800
2010-09-20 by Russ Rose
call us and we ll send you one 919-286-1991, hours 9-6 est
2010-09-20 by Doug
Can you post a good close-up photo or two?
2010-09-19 by p
anyone know where i can buy one of these suckers?, i need to replace (or repair!) the sequencer speed slide pot on a korg poly800.....45mm length, 35mm
2010-08-15 by arthur
im not sure if my dw8000 has a firmware problem does anyone have a firmware image or a preprogrammed eprom/.? i have an eprom programmer
2010-07-19 by joelbraverman
http://www.youtube.com/watch?v=LvuuBBPwhRU The big fat bassline that comes in after a bit is the DW-8000. The snappier bassline is a Korg Electribe EA-1. Video
2010-06-28 by john wimberly
it s out of my league techwise. I would suggest printing out the service and owner manuals to help you. ... From: grantpbt Subject:
2010-06-27 by grantpbt
I just bought a JX3P and DW8000 locally for a very good price. Unfortunately both were sold in a million pieces. The JX was an easy rebuild/repair and it works
2010-06-12 by Ricardo Cassolatto
http://v2qq8fslvlb.svaxqump.com _________________________________________________________________ O INTERNET EXPLORER 8 TE AJUDA A FICAR PROTEGIDO DE FRAUDES
2010-06-03 by Ben Markowitz
Sounds like it s stuck in one of the test modes. Sent from my Verizon Wireless BlackBerry ... From: william stangeland Date: Thu, 3 Jun
2010-06-03 by william stangeland
just got a korg dw 8000 from ebay for a decent price. seems to be fully functional except that any key depressed produces the same note and the tune slider has
2010-04-14 by ken_deel
I can increment down below 1, and get some number like it is keyboard transposing with numbers like G5, d3 and so forth. They increment up that way also. Until
2010-04-08 by ken_deel
Tired three keyboards (Korg 01/w, D-50, sxkn5000), and get the same thing. About an octave in the center of the keybaord are dead notes. You go past them and
2010-04-06 by Mark B
I don t believe the Musitronics/Angel City Turbo board came with patches. I m pretty sure mine didn t come with any back when I bought mine. Musitronics
2010-04-06 by Ronald Christoph
Dear 8000-Friends does anyone have the sound files of the musitronics expansion? It s cassette interface format. thanx in advance! Ronald Christoph
2010-03-14 by Tomhikon
Maybe it was a cable I didn t notice it again earlier today. Thanks
2010-03-14 by Tomhikon
Maybe it was my patch cord because I don t notice it anymore. Thanks
2010-03-13 by bernard.escaillas
If the pop occurs on any of the eight voices, the problem probably lies at the point where the 8 signals are summed before the delay board, or after the delay
2010-03-12 by Tomhikon
Well I m not sure how to go about testing option 3, but I tried all the others and it still pops. I tired the slow filter,fast vca, it seems the vca area is
2010-03-12 by bernard.escaillas
Hello, I think you could first isolate the problem in a few steps: 1 - play the DW from an other device through midi - No more pop : check the keyboard for bad
2010-03-11 by Tomhikon
So does anyone think it may be a power supply issue? a chip issue? I can send audio clips to someone that may know if you like. I m wondering if I should shell
2010-03-07 by soundcrafter_23320
Anyone familiar with the Turbo mod board please drop me a line. I think mine is acting wierd but I want to compare notes with other users to be sure. Thanks
2010-01-27 by PC
Yeah sounds like you might have a hardware issue... I mean, I really never noticed these kinds of problems with either my DW-8000 (which I no longer have) or
2010-01-27 by Tomhikon
You know I jumped the gun earlier this synth is crap, I can imagine how nice it might sound but there is obviously something wrong with mine. It s completely
2010-01-27 by Malte Krug
Hi, broken Delay/Chorus? Switch off the FX and listen again. Just a thought.. Malte Am 27.01.2010, 14:57 Uhr, schrieb inspectorpenny
2010-01-27 by PC
Is that related to the digital delay? try reducing the feedback to see if its related... -pc
2010-01-27 by inspectorpenny
On certain patches on my 8000 there is an annoying static which will cycle every few seconds. Some patches cycle faster than others, some don t have this
2010-01-25 by Tomhikon
Makes sense, I m getting use to it already. I guess I was worried about the korg curse. I ll always keep my wavestation but after selling an er1 and microkorg
2010-01-25 by Garold Carson
I ve never had this problem on my DW8000.
2010-01-25 by PC
It s not a bug, just a fact of life when you have fast envelopes. I m actually surprised the DW s envelopes are fast enough for you to notice it. What you are
2010-01-24 by Tomhikon
Ah so there is no fix then, Korg should have corrected that. I usually mask it with cutoff and eg, cutoff doesnt like it below 16 on mine. I had a juno 106 was
2010-01-22 by Eric Hall
It happens when a key is pressed in the middle of a waveform cycle. I.E. the wave is not at zero amplitude. That causes an audible click. The fix is to raise
2010-01-22 by Tomhikon
I have the same problem, any ideas yet?
2010-01-05 by Russell Rose
I have a ROM, version 12, that i am willing to part with. Only but, its in a working keyboard that i dont want to trash. So the deal is this , i am willing
2010-01-02 by F.Manduca
Woah, really did nt know about a Dw 8000 firmare version. How could I find out it? Thanks a lot and a happy new year.