dw8000 component test
2012-05-18 by JimB0
I have three of four bad dw8000 synths but no matter how much I mix and match parts I can not get one good synth out of all the parts. Is there anywhere on
Yahoo Groups archive
Archive for DW8000.
Messages
Page 5 of 24 · 1184 messages matched
2012-05-18 by JimB0
I have three of four bad dw8000 synths but no matter how much I mix and match parts I can not get one good synth out of all the parts. Is there anywhere on
2012-05-15 by Chet Lamm
My DW8000 does the following: Turns on fine., LCD lights up fine with 11 showing. Single slider works and values change in parameter value window. No
2012-04-19 by Mark B
Presuming the circuit is the same as the DW8000, it s a 100K linear pot, going off the DW8000 service manual. -Mark
2012-04-19 by kevin@pipeline.com
Anyone happen to know the specs on the EX-8000 s data entry pot? I just received an EX-8000 (yah!) and turning the data pot feels like stirring a can of
2012-04-14 by Mark B
Ah, thanks for the clarification. If I understand correctly then, this is the tape-out audio as a .WAV file of patches found in the Sysex patch data files
2012-04-14 by Jerome St-Pierre
Hello Mark, The patch bank doesn t contain anything related to the Musitronics turbo board (even if the board was installed when I backed it up). They are
2012-04-13 by Ronald Christiansen
Dear Jerome and Mark, thank you very much! After laying under my couch for 12 years I will bring the DW back into game; change the battery and give feedback
2012-04-13 by Mark B
I ve added Jerome s 64 Musitronics patches in .WAV file to the dw8000.com/downloads page. They re listed as 64 patches
2012-04-12 by Jerome St-Pierre
Hi Bob, I was very glad to hear about your experience with the turbo pack secure banks. You confirmed what I first thought: this feature might not work anymore
2012-04-12 by Mark B
If anyone has it and can send it to me, I ll post it to the downloads on dw8000.com. -Mark
2012-04-12 by Ronald Christiansen
Hello guys, does anyone have the patches for the musitronics expansion board? It was a tape... http://www.musitronics.org/products/dw8000_ex_e.html Musitronics
2012-04-12 by Paul Cunningham
Ah great idea! I ve seen someone do this (unneseccarily) to a Waldorf XTk. -pc
2012-04-10 by Bob
Jerome: After a year in storage, I too pulled out my unit and immediately replaced the batteries to both the keyboard and the turbo pack. Like you, I loaded
2012-04-10 by tim p
Hi Jerome I d very much like to have a listen to these patches... and those on the Pallium site. Would the patches work in the EX-8000? I can t see why not,
2012-04-09 by Paul Cunningham
Oh and I was hoping to find a workable electric piano sound... either a suitcase rhodes or wurlitzer sound. just a little warm and fuzzy, and not the clinkly
2012-04-09 by Paul Cunningham
Cool... yeah shoot me the WAV via email... i had considered going through all of them and doing the same thing. After programming String sounds on a number of
2012-04-08 by Jerome St-Pierre
After I installed the Musitronics turbo pack and wiped out all of my patches by mistake, I loaded 8 of these banks in the secured banks of the turbo pack. I
2012-04-07 by PC
I m sure that many of you are very familiar with Pallium s patchset downloads for the DW-8000... http://www.pallium.com/bryan/dwpatches.php If not, check it
2012-04-07 by kevin@pipeline.com
Rack ears i do not know about, but if you are in North America, i always just open up the unit and replace the two prong adapter with a three prong C14 like
2012-04-06 by JOE YOUNG
Hi! thanks for the welcome, the dw8000 was my first synth ive had it since 1990! ive recently bought a ex8000 but the rack ears and power cord are missing,
2012-04-05 by kevin@pipeline.com
Kool, looking for an EX myself. Welcome. /KRM
2012-04-05 by Dan Moyer
welcome
2012-04-05 by JOE YOUNG
hi, im new here i have a dw8000 and ex8000 more later! J
2012-03-05 by Mark B
Sorry for the long absence. I have updates on the status of my DW8000. I mentioned previously that I ve had my DW8000 apart many times, and that I tried
2012-02-14 by roullierd
I ve been unable to posts messages to the group last weeks... I ve found a joystick with a french Poly owner, so I will try this soon. Thanks for your replies
2012-02-01 by Mark B
I just used vintageplanet over the holidays for a DW8000 key contact assembly and they were great to work with. If they have the parts you need, I recommend
2012-01-31 by glynn buckley
Check out www.vintageplanet.nl/ in Holland for spares and prices very nice chap as well GLYNN To: DW8000@yahoogroups.com From: jayserber@gmail.com Date: Tue,
2012-01-31 by Jason Serber
i think i have an extra poly 61 joy stick i can sell, not sure if it is fully working, i think it might need a metal slide contact on the bottom side of it,
2012-01-31 by roullierd
Hi ! I just bought an old Poly 61 that need a bit of repair. First of all it doesn t have any Joystick, I m not sure but is the Joystick the same as Poly800 or
2012-01-13 by Natalia Rakowski
I actually found the problem. I didn t have parameter 85 set correctly so it was only transmitting note data. Thanks! -- Natalia ... I actually found the
2012-01-13 by Doug
Since it works audibly in a patch, can you watch the MIDI activity LED on the unit the DW-800 is trying to control and see if there s activity on the LED as
2012-01-13 by Chet Lamm
See if the receiving device has it s controller event data set to enable . ________________________________ From: Mark B To:
2012-01-13 by Natalia Rakowski
Okay. Can anyone point me to what should I look for when I open the synth up to fix the issue? Thanks! -- N
2012-01-13 by Dan Moyer
That s a fair price. I hope your user base is large enough to pay off your investment. I d most certainly recommend it to other people, but probably not
2012-01-13 by Mark B
Yes, it should transmit the channel aftertouch data over MIDI. -Mark
2012-01-13 by Xtra email
Maybe if you included the currencies you are talking about in your statement it might be a little more balanced. - MH
2012-01-12 by Natalia Rakowski
Hi everyone - I recently picked up a DW-8000 on the cheap. Everything seems to be functioning except that I can t get it to transmit aftertouch over MIDI.
2012-01-11 by Daniel
The Kiwitechnics Patch Editor has a ridiculous price tag of $450 (or so). I accomplished the same thing with my APC40 and Bome s MIDI translator (total cost
2012-01-11 by Mark B
The DW8000 doesn t support the MIDI Data Transfer parameter 78, which the EX8000 does. -Mark
2012-01-11 by cfmh@xtra.co.nz
The Kiwitechnics Patch Editor will work with the EX8000, DW8000 and DW6000 as well as a growing list of others. -MH
2012-01-10 by Dan Moyer
You might want to verify that it does, indeed work with a DW; I ve had problems with EX specific software not working with my DW in the past. How much is this
2011-12-26 by glynn buckley
Thanks Guys......off to button pushing land, curtesey of you all Thanks GLYNN To: dw8000@yahoogroups.com From: thowdnudger@hotmail.co.uk Date: Mon, 26 Dec 2011
2011-12-26 by Joey
Hey all, I m looking for a list or resource to order small screws and fasteners for my DW8000s and DSS-1. The published service manuals seem to be abbreviated
2011-12-26 by jeray31@comcast.net
Hi Glynn - the manual is already in the files section, as dwturbo manual.zip. The mod adds a great deal of functionality to the DW8000 - Cheers, Jim
2011-12-26 by glynn buckley
Much appreciated.....makes the 8k a guitar player slayer.....still a big warm sound Thank You GLYNN To: DW8000@yahoogroups.com From: Bugsi@mac.com Date: Sun,
2011-12-26 by Mark B
I have the Angel City Turbo board s instructions as .jpg files, I ll convert them to PDF and post it on dw8000.com a bit later today. I ll post here when it s
2011-12-25 by glynn buckley
Hi, I see Mark says he has a new angel city turbo board.......would you be able to post the instructions to the group???...My 8k has one fittted, and I
2011-12-25 by Mark B
Thanks for your comments. Yes, I m confident the problem with my DW is the contacts in the contact assembly. Usually just a second strike of the continuous
2011-12-25 by mondovermona
Cheers Mark, I now see that you have had a really hard tome with your keys. I have repaired now several DW8000 contact boards which had the same initial
2011-12-25 by Chet Lamm
Was it straight Coca-Cola? ________________________________ From: Mark B To: DW8000@yahoogroups.com Sent: Sunday, December 25, 2011 1:27 AM