Re: Koby snare
2007-01-26 by emf
... Koby. ... Around the time when Sherpa sent me their snare to review, I thought that it might be a good idea to review a Koby product as well. Koby was
Yahoo Groups archive
Messages
Page 28 of 283 · 14139 messages matched
2007-01-26 by emf
... Koby. ... Around the time when Sherpa sent me their snare to review, I thought that it might be a good idea to review a Koby product as well. Koby was
2007-01-25 by sjadav
I currently own a DTXplorer and want to upgrade the snare to a 2 zone mesh pad. Have heard a lot of good things about the one made by Koby. Does anyone have
2007-01-22 by emf
... but ... into ... it ... appreciated! ... Steve, I wrote that review three years ago. I can t remember everything that I experienced with the Sherpa, but I
2007-01-21 by Keith
... Steve, I am not familiar with the Sherpa, but it seems to be a dual piezo pad so it needs two inputs. If you want to feed the second pad through the kick,
2007-01-21 by steve_in_ottont
Hi, I bought a Sherpa snare to replace the standard one on my DTXpress III. I read the document in the files about setting up the Sherpa but I m still at a
2007-01-19 by Keith
... is to connect it to the module, can i use the other to output to another speaker? It allows you to use the KP65 as a Y splitter for use on inputs 9/10. So,
2007-01-18 by DARKMOON
Hi, What is the purpose of the other jack in the KP65? The other one is to connect it to the module, can i use the other to output to another speaker? Thanks.
2007-01-17 by Keith
... I think you need the DTXtreme forum, unless you meant DTXpress II http://launch.groups.yahoo.com/group/DTXtreme/ Otherwise, I would suggest you take the
2007-01-17 by gibson280
Salut Sur mon module DTX v2 j ai changer ma pile lithium , et maintenant a chaque fois que j etteint mon module , je perds tout mes reglages merci de votre
2007-01-17 by Keith
... Shane, You can add two single zone pads to inputs 9/10, using a Y splitter cable (2 mono to one stereo cable). Other than that, the only other option I
2007-01-17 by Shane
Can you add pads to a DTXpress II without adding another brain??? Thanks, Shane
2007-01-16 by tinali1997
my friend want to sell me Roland TD-7. not sure i want to buy it or not. thanks,tom
2007-01-16 by Keith
... Gregg, Maybe someone who has had this problem may be able to be more specific, but it would be worthwhile checking to see if you have any specific
2007-01-16 by pt_cyclist
From time to time, when I play a crash on my cymbal and a note on the bass pad, I only get the cymbal crash, no bass drum sound. What s the fix to this? I
2007-01-16 by Keith
... Tom, That option changes the function of the volume controls so you can independently adjust the snare & kick without holding down the shift key, and
2007-01-16 by tinali1997
Keith, found the problem, there are two modes, one for pratic and one for live. thanks though. tom
2007-01-15 by Keith
... Tom, Not much difference between 112 & 127. What mixer are you using? Is it that the DTXpress is too quiet or that the keyboard is really too loud? If
2007-01-15 by tinali1997
it was 112, i set it to 127. but still the same way. i am total lost now. thanks though. tom
2007-01-15 by Keith
... Tom, There is a master volume setting in the menus UT TG MASTER Volume . Mine is set at 127 (the maximum) - try checking that. Keith.
2007-01-14 by tinali1997
Yes, i am using 1/4 jack. the dtxpress was turned all way up. the gain is still low level. so i used gain control to lift it up, it almost is all the way up,
2007-01-14 by Keith
... Are you using the 1/4 jack sockets at the rear? Is the volume turned up full on the DTXpress? While the headphone volume can be a little low for some
2007-01-14 by tinali1997
I have dtxpressII, when i input it into mixer, the gain and fader turn all the way up, but it is still weak compare with the keyboard input. what can I do?
2007-01-13 by Keith
... First, check the adjustment pot on the cymbal itself (underneath). Check you have the cymbal set up correctly on the trigger edit menu as the PCY150.
2007-01-13 by tableshooter2003
Hello all, great forum ! I m running a PCY150S cymbal thru a DTXpress module and can t get any volumn out of it. Well there is sound but it s hard to hear.
2007-01-13 by Keith
Have you tried the DTXpress straight into the 5.1 sound system? I used to run my DTXpress through some Logitech Z2300 speakers amd it was plenty loud enough
2007-01-13 by Corey Dixon
Keith, I m new here too, but while we re on the subject... my DTXpress III is input to my PC soundcard, then back out the same card via 1/8 inch jacks. I get
2007-01-11 by Keith
... Chris, I am glad it is sorted. Most people don t know the pads have an adjuster because you don t normally need it. Keith.
2007-01-11 by cbarnhart44
Just following up, turns out it was the pot on the cymbal....never noticed it had one... it was set at about 3 Chris
2007-01-11 by Keith
... where you ... need to ... playing ... By all means try that, but I don t think it works for the loop sounds (ones listed with L in the voice data) - I
2007-01-11 by Santana Moll
Hi Grant, if you hit the pad, go to the voice menu and to the page where you can choose from: normal, padsong, play and stop, this is the one you need to
2007-01-11 by Keith
You have selected a looped sound for the pad (L 12). Go to the Voice menu for that pad and select a different sound, one that isn t from the Drum Loop (L)
2007-01-10 by grant
Can someone jog my memory on how to turn off a percussion sound ? ( DT express 2 - I have the didgeridoo assigned to start on a pad but it wont stop when I hit
2007-01-10 by cbarnhart44
Keith, Thanks, I ll try your suggestions and and see what happens. I hadn t thought to try the gain or MVEL - will try that first. Chris ... some ... helps.
2007-01-10 by Keith
... Factory reset is in the Utility menu: UT SYSTEM Factory Set then press enter (page 53 of the DTXpress 1 user manual). Is the volume low on headphones or
2007-01-10 by joelmarni
i m new to the dtxpress and have an old kit (about 5 years old). the volume is so low. is there a way to increase the volume or do i have to do it pad by pad
2007-01-10 by Keith
... Chris, Unfortunately, the Yamaha DTXpress module is not as sensitive to rim hits as main pad hits. I have never quite worked out why they have made it
2007-01-10 by cbarnhart44
I built a couple of the DTXpanders and they work great...Thanks Keith! I have Tom1 split and added a 4th Tom - that circuit works great. However I have TOM3
2007-01-10 by Keith
... Check the attenuator switch on the back of the module. Try swapping the piezo connections over (the DTXpress seems to be more sensitive to positive going
2007-01-10 by jeffsweigard
My piezoes on my BP80 went bad so I put in new ones. The signal is weak. I messed with the gain and Mvel but it is still weak. I m getting about 30% when I hit
2007-01-10 by joelmarni
i m in canada and can t buy from the u.s. or it costs me duty and adds up real quick. i figured i could just get some cheap pvc and cut it down from home
2007-01-10 by Keith
... Todd, I haven t taken all my pads apart becuase I have had any problems, although there are pictures in the photos section from OGD who has taken just
2007-01-10 by tunedude10
... three. It ... trigger ... missing ... the guts ... 2, ... using. ... Keith, thanks for the reply. I would be interested in ANY info you have on
2007-01-09 by eelecurb@everestkc.net
http://shop.drumbalaya.com/Electronic_Drums/Hardware_--_Racks_Parts Drumbalaya sells rack tubing and parts in the U.S. Steve ... From : joelmarni
2007-01-09 by Keith
... Joel, Try contacting Yamaha - they should be able to supply the appropriate spare parts. Keith.
2007-01-09 by joelmarni
i have lost the two small pipes and the connectors that connect the toms to the horizontal bar. can i just buy some pvc pipe? what would i use as connectors?
2007-01-09 by Keith
... I will send you a personal email - it was never my intention to use the forum for selling things which is why I posted the schematics here (and the
2007-01-09 by Keith
... understand things as well and I always learn from your replies. I really appreciate your explanation on things. ... Thanks, I am glad it is useful. I am
2007-01-09 by Scott
OK, makes sence. I definatly do not have the expertise to put that together. Not without a total step by step parts and how to guide. What do you charge when
2007-01-09 by DARKMOON
Hi Keith, I must say, your replies are really useful. I ve been trying to understand things as well and I always learn from your replies. I really appreciate
2007-01-09 by Keith
... The DTXpander is something I originally designed to allow people to plug two pads into one input (eg a tom input) to allow expansion of the kit using the