Yamaha DTXpress/DTXplorer/DTXtreme

So what you are saying is that the Trigger Edits that
say "Save to input x or y" will then be transferred to
each individual input on the TMC-6?  Say I saved a
crash cymbal setting on the DTX to input 7...I would
then take the input 7(saved crash settings) and
transfer them to say input 3 on the Roland?  Then I
could plug in an x-tra crash to input 3 on the
Roland...hit the crash pad(that is plugged into #3 on
the Roland) and those settings from the DTX #7 input
will be reproduced and transfered to #3 crash pad on
the Roland?////Sorry I SEEM SO DENSE...this is all NEW
stuff to me...  and ..oh yah...I may have a KITI...see
my post earlier...heard from Rezdrums, if this doesn't
pan out I will probably go with the Roland....Jade
--- "liberatusvirus <liberatusvirus@...>"
<liberatusvirus@...> wrote:
> Jade,
> 
> You'd do it through a MIDI hookup. The first step
> would be to 
> transfer sounds from the DTX module to the TMC-6's
> individual inputs 
> (with the pads connected to them) via MIDI-in,
> probably by hitting 
> pads on your kit that have voices saved to
> particular user note 
> numbers, which the TMC-6 can store.  From that point
> on, until you 
> change it, the TMC-6 uses each of those note
> numbers/inputs to 
> access your selected voice (or voices, if the input
> is stereo) in 
> the DTX via MIDI-out whenever the appropriate pad is
> hit. Once 
> you've programmed the sounds, you set up the
> triggering functions on 
> the TMC-6 (gain etc) to your liking. Voila, now you
> can play. The 
> TMC-6 functions like an intermediary, an electronic
> drum broker, 
> between the extra pads and the DTX module, which
> supplies the 
> sounds. Those are the nuts and bolts of a MIDI
> interface. The 
> details of how the TMC-6 accomplishes its job will
> have to be 
> between you and the manual.
> 
> 
> --- In DTXpress@yahoogroups.com, "jadiebooshkie 
> <jadiebooshkie@y...>" <jadiebooshkie@y...> wrote:
> > Just wondering if I got the Roland TMC-6...how
> would I hook it to 
> > the DTXII brain...would MIDI OUT on the TMC-^ plug
> into the MIDI 
> IN 
> > on the DTX?...I am assuming it would run off or in
> conjunction 
> with 
> > the DTX module...is this so?
> 
> 


__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com