Yamaha DTXpress/DTXplorer/DTXtreme

--- In DTXpress@yahoogroups.com, "emf" <liberatusvirus@y...> wrote:
I know that 
> there was a site that showed the interior of both earlier Pintech 
> models, but I can't remember where. I'll work on it.

I couldn't find the site with the Pintech interiors, but here's one 
for the Hart meshes, which in relevant respects aren't too different:
http://home.naxs.com/alex/hartpage2.htm.

Just picture a solid-color pillar sitting on a perforated plate or 
single rail with a piezo (unseen) sandwiched between them. The wiring 
from the piezo to the board at the output jack runs right across the 
drum. On a dual-zone CC, a piezo hangs by a metal rail from the 
bearing edge of the drum beneath the rim, which holds it in place, 
attaching to the shell with adhesive and to the board at the output 
via its own hot and ground wires. 

Ed