Thanks Joe. I'll see what happens after trying your
suggestions.
Craig
----- Original Message -----From: JoeSent: Tuesday, November 25, 2003 5:19 PMSubject: Re: [Evolver] Re: OS 2.0 - New Envelope Parameter Mod DestinationsOn Tue, Nov 25, 2003 at 04:31:19PM -0800, Craig Wiper wrote:
> I'm using Midi-Ox and everytime I try and load the first PIC file,
> halfway through the load I get an error message telling me that the
> port is transmitting data to the device, wait until the data has been
> transmitted, and then try again.
I don't really understand that error message. It makes it sound like
you were trying to do some utility in MIDI-OX while it was transmitting.
Anyway, I would suggest the following:
1) transmit directly into the Evolver via MIDI
2) don't run any MIDI back into your PC
3) open Sysex view in MIDI-OX and load the file
4) then right click and select "send" (or select form the drop-down menu)
5) a window will pop up and will start counting the number
of bytes transmitted; the Evo will also start its counting
6) only when the window has disappeared and the Evo has rebooted should
you try to do anything else
If that doesn't work, please detail your setup a bit more and
when/where/how it gives you the error messages.
Good luck!
Joe
To unsubscribe from this group, send an email to:
DSI_Evolver-unsubscribe@yahoogroups.com
Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
__________ NOD32 1.563 (20031125) Information __________
This message was checked by NOD32 Antivirus System.
http://www.nod32.com