Re: [AN1x] ot analog synths
2012-02-01 by Jeff
Hi Jimmy ! ... They have as many oscillators (or pairs of oscillators as in your AN1x) as the maximum polyphony. 10 notes maximum allowed = 20 oscillators.

Yahoo Groups archive
Messages
Page 22 of 268 · 13386 messages matched
2012-02-01 by Jeff
Hi Jimmy ! ... They have as many oscillators (or pairs of oscillators as in your AN1x) as the maximum polyphony. 10 notes maximum allowed = 20 oscillators.
2012-02-01 by Bob S.
Depends on the polyphony of the synth......for example, a Roland Jupiter 6 has 6 pairs of oscillators dynamically assigned by an on board cpu that scans the
2012-01-31 by spaceanimals
A friend of mine built a radio shack synth. It uses one osc and something to divide it into 10 frequencies. How many ocs does a polyphonic synth have, and how
2012-01-30 by vdftreghy
Guys i need help I have both XP and 7 virtualised in Virtual box and Fusion with midisport 8x8. When i use the an1x editor to retrieve and send patches/voice
2012-01-29 by Christopher Keep
Thanks for this, Richy. The Elektron sysex tool works fine with the AN1X, but it was very helpful to be alerted to the fact that that the patches load in their
2012-01-29 by richardon
Hinweis : AN1x is using different forms of Syx Data transfer. A litte bit silly : Format a) Only Writing in edit buffer Format b) Directly storing in a
2012-01-29 by richardon
Hi Chris I am also using An1X editor Version 1.1 with Windows XP. And most time it works. A guy, An1x friend i know via an german music forum is using Mac and
2012-01-28 by AN1x-list@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the AN1x-list group. File : /AN1x
2012-01-28 by cjkeep2000
Greetiings All, I m getting back to my AN1X after finally having one of the assign knobs replaced (Yamaha Canada still has them in stock), and thought I would
2012-01-27 by spaceanimals
Go to tempo, scroll down, at the bottom is MIDI Jimmy
2012-01-26 by 호성 한
Hi, I m using VMware Fusion for running Windows XP virtual machine on Lion. Because VMware Fusion supports USB devices, It s easy to connect between Windows XP
2012-01-26 by Jeff
... I don t think so, but having no Mac ... ... You can run your AN1x edit through a Windows emulator , this kind of software (synth editor) does not requires
2012-01-26 by Andy Funnell
Hi: Hoping this is possible - the manual says it is, but doesn t tell you how! I need to sync my AN1X to my Korg Triton Extreme via MIDI to use the arpeggiator
2012-01-25 by thedlovas
I post my tracks on my soundcloud page - I ve got several actually. http://soundcloud.com/davidlovas http://soundcloud.com/RingGalaxy
2012-01-25 by derek192603
Hi, I don t do an AN1x Editor (yet), but an.factory is a cross platform librarian for arranging patches between files and a library. My Mac support is a few
2012-01-25 by derek192603
... I post on my own websites www.carregddu.co.uk www.echoes-music.co.uk www.purefloyd.co.uk See if you can spot the AN1x (hint I haven t used it in Pure
2012-01-25 by jadestarbaby
Hi, I was wondering whether there is a Anx1 editor for macs. I am running on snow leopard. Any help would be great. Thanks, Robert Heirendt
2012-01-24 by richardon
Hi Mark I am using a cheap USB midi cable wirh Windows XP And it works with AN1x Editor For other stuff i am using Windows XP and the EMU USB Midi Box And it
2012-01-24 by mark
You got me :) cheap cable. I m using the emu xmidi. After reading the other thread about this I m pretty sure you re right. I guess it s time for midiman. I m
2012-01-24 by richardon
Hi Denis Thank you for your positive feedback. I would like to know, how you change a sound like watcher for your taste. For example EQ parameters and Filter
2012-01-24 by Jeff
Hi all ! I have no problems with a less than basic USB - MIDI interface (Prodipe 1 i/o) either with XP SP2 and now XP SP3. Never tried with Vista or Seven...
2012-01-24 by derek192603
Hi, Have you tried running the program in a compatibility mode for an earlier version of windows? Note as well that, whilst this doesn t affect my AN1x, I have
2012-01-24 by Peter Korsten
... Obligatory question: what MIDI interface are you using? By any chance, one of those inexpensive USB-to-MIDI cables? - Peter
2012-01-23 by denis_mathys2001
Wonderful job! The sounds are so soulful and inspiring. Many thanks for sharing them.
2012-01-23 by mark
hey guys this is my first post here :) So I have my an1x hooked up to a pc running windows 7 32 bit and an1xedit wont work correctly. When I try to load a
2012-01-21 by richardon
Hi Jeff ... Thats no problem because dual mode can be used. In this mode AN1X has 4 OSC and because Mini is monophonic no problems with polyphonie. And as far
2012-01-21 by Martin
... I ended up using a midi file bulk dump thingie. The Sibelius patch is in the London set of voices, which is in the Files section here.
2012-01-21 by Peter Korsten
... Where? - Peter
2012-01-21 by Martin
Not to worry; I found it. Thanks
2012-01-19 by Jeff
... If it s not one it sounds very close to a Mini...
2012-01-19 by Jeff
Hi Richie ! answers in your text : ... Mini should be tricky to emulate because it had 3 VCOs...and AN1x only 2, that is enough most of the time.... ... The
2012-01-19 by djmikemills
Update on the V1.04 Rom Situation. I have just received my new V1.04 Rom for my AN1X that I got from Crazy Analog recently. Part No XS467100 IC Mask LH538600A
2012-01-18 by richardon
Another example for this damned ARP Omni http://www.youtube.com/watch?v=XNo6YPlKfDc Using its polyphonic pseudo Polysynth and of course you can her a minimoog
2012-01-18 by enrique c.
Awesome richy
2012-01-18 by richardon
Thank you for your positive feedback. It was really a hard work to implement this Mellotron Sounds. But the mellotrons are the best of the EMU vintage package.
2012-01-18 by spaceanimals
My beloved Vintage Keys has died. Beautiful synth. I bought it from a guy who had a pet mountain lion and several bobcats--one in the room with me. So today s
2012-01-18 by Martin
Hello. Would any of you be able to direct me to where I can find the string patch known as Sibelius, in a file format that I can load into AN1xEdit? I can find
2012-01-18 by Ed Edwards
Jimbo, MKS was the Roland prefix for all of their rack units in the 80s. There were about 8 or so iterations – all mostly digitally controlled analog and
2012-01-17 by Conn-Man
Agreed!! A Most EXCELLENT sound clone. Congrats!! ... From: Jeff To: Sent: Monday, January 16, 2012
2012-01-17 by Jeff
Hi Jimmy ! ... I suppose it s a Roland synth, the MKS 80. It was an expander module, a formula very used in the 80 s, when analog monsters disappeared to be
2012-01-17 by Peter Korsten
... The MKS80. - Peter
2012-01-17 by jammie
mks80 which are jupiter8 in a rack or a today equivelent would be the jp8000 and jp8080 but the osc specs of the an1x are better than either as i sync modes
2012-01-17 by spaceanimals
I ve been using some of the list s store of presets--I think the English patches--and found a group called MKS that are very nice. What synth does that refer
2012-01-16 by Nate King
Wow! Another great set of sounds. Thank you so much for sharing these and to everyone out there that shares their work. I know I very much appreciate anything
2012-01-16 by Jeff
Hi Richie ! Watcher of the Skies is outstanding, it sounds really like Tony Banks introducing this famous song. Nice emulation ! Forza AN1x !;-) @+ J.F.
2012-01-16 by richardon
Hi Actually i completed my An1X Mellotron project and posted the results to the AN1X yahoo folder. The sounds are tested and adjusted to the templates with an
2012-01-16 by AN1x-list@yahoogroups.com
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the AN1x-list group. File : /AN1x
2012-01-16 by djmikemills
Even though there is absolutely nothing wrong with my new AN1X from crazy analog I would rather have the New latest os rom as it fixes a multitude of sins.
2012-01-16 by jammie
what does this os sort out as i have never had any problems with mine and i know mine is an old os model as i have had it from new in 1998 or was 1997 i would
2012-01-16 by djmikemills
I have just order the updated V1.04 roms from yamaha uk today. I will let you know when the arrive. They still appear to have stock, which is great news. Means