50g

I didn't see any mention of this yet (though my email's acting up today so searching was a bit of a pain).

From http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=215348&prodSeriesId=3235173&swItem=ca-74746-1&prodNameId=3235174&swEnvOID=228&swLang=8&taskId=135&mode=4&idx=0

Version: 2.15 (14 Sep 2009) <-- not 2006!

I just updated to it and it seems to have been successful. This was linked to from their main driver and software listing for the calculator (ie, not through 40 layers of caution this is a beta don't use this or you may die of seemingly unrelated causes because we didn't test the killowner function thoroughly yet).

I have the 2.15 ROM update in the Connex4 directory and the computer talking to the HP50G in xmodem USB calculator mode, But when I try to update ROM form the Connex menu it says to press "ON and + - keys for 3 secods together while pressing reset then release reset " to get an upload menu but I have tried this at least 6 times and no menu appears on the calculator. What gives?

Lannie Norris

--- In 50g@yahoogroups.com, "jimbostrudel" <freecycle@...> wrote:
>
> I didn't see any mention of this yet (though my email's acting up today so searching was a bit of a pain).
>
> From http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=215348&prodSeriesId=3235173&swItem=ca-74746-1&prodNameId=3235174&swEnvOID=228&swLang=8&taskId=135&mode=4&idx=0
>
> Version: 2.15 (14 Sep 2009) <-- not 2006!
>
> I just updated to it and it seems to have been successful. This was linked to from their main driver and software listing for the calculator (ie, not through 40 layers of caution this is a beta don't use this or you may die of seemingly unrelated causes because we didn't test the killowner function thoroughly yet).
>

No! Hold the + and the - keys and press reset using a pin (you do not need to hold reset), count out 3 sec (1001,1002,1003), let go of the + and - keys. The desired menu should show up.

BTW, you can also upgrade using a FAT formatted SD card:

http://www.educalc.net/284489.page

--- In 50g@yahoogroups.com, "lfnorrisjr" <lfnorrisjr@...> wrote:
>
> I have the 2.15 ROM update in the Connex4 directory and the computer talking to the HP50G in xmodem USB calculator mode, But when I try to update ROM form the Connex menu it says to press "ON and + - keys for 3 secods together while pressing reset then release reset " to get an upload menu but I have tried this at least 6 times and no menu appears on the calculator. What gives?
>
> Lannie Norris
>
>
> --- In 50g@yahoogroups.com, "jimbostrudel" <freecycle@> wrote:
> >
> > I didn't see any mention of this yet (though my email's acting up today so searching was a bit of a pain).
> >
> > From http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=215348&prodSeriesId=3235173&swItem=ca-74746-1&prodNameId=3235174&swEnvOID=228&swLang=8&taskId=135&mode=4&idx=0
> >
> > Version: 2.15 (14 Sep 2009) <-- not 2006!
> >
> > I just updated to it and it seems to have been successful. This was linked to from their main driver and software listing for the calculator (ie, not through 40 layers of caution this is a beta don't use this or you may die of seemingly unrelated causes because we didn't test the killowner function thoroughly yet).
> >
>

On 11/29/2009 01:54 PM, Freeway wrote:

> No! Hold the + and the - keys and press reset using a pin (you do not need to hold reset), count out 3 sec (1001,1002,1003), let go of the + and - keys. The desired menu should show up.

When I updated my 50g to 2.15 some months ago, I tried the above
procedure until I was so frustrated I wanted to throw it against the
wall. I didn't want to give up because it is *supposed* to work.

> BTW, you can also upgrade using a FAT formatted SD card:
>
> http://www.educalc.net/284489.page

Realizing I was probably shortening my life expectancy and that of the
keys on the calculator, I used the SD card method and then found myself
wondering why I hadn't gone that route before reaching such a high level
of frustration.

> --- In 50g@yahoogroups.com, "lfnorrisjr" <lfnorrisjr@...> wrote:
>>
>> I have the 2.15 ROM update in the Connex4 directory and the computer talking to the HP50G in xmodem USB calculator mode, But when I try to update ROM form the Connex menu it says to press "ON and + - keys for 3 secods together while pressing reset then release reset " to get an upload menu but I have tried this at least 6 times and no menu appears on the calculator. What gives?
>>
>> Lannie Norris
>>
>>
>> --- In 50g@yahoogroups.com, "jimbostrudel" <freecycle@> wrote:
>>>
>>> I didn't see any mention of this yet (though my email's acting up today so searching was a bit of a pain).
>>>
>>> From http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=215348&prodSeriesId=3235173&swItem=ca-74746-1&prodNameId=3235174&swEnvOID=228&swLang=8&taskId=135&mode=4&idx=0
>>>
>>> Version: 2.15 (14 Sep 2009) <-- not 2006!
>>>
>>> I just updated to it and it seems to have been successful. This was linked to from their main driver and software listing for the calculator (ie, not through 40 layers of caution this is a beta don't use this or you may die of seemingly unrelated causes because we didn't test the killowner function thoroughly yet).