50g

Okay, so I have the calculator connected via Xmodem. The connectivity
kit is connected and I can see the directories and variables within the
HP (I'm also able to send commands to the HP via CK).

However, I'm unable to upload/download any files (I'm trying to upload
the NeoPolys library). All four of the upload/download options under
the File menu in the connectivity kit are "greyed out" and not
accessable. *confused* TIA

~S

Shawn D. King wrote:

>
>
> Okay, so I have the calculator connected via Xmodem. The connectivity
> kit is connected and I can see the directories and variables within the
> HP (I'm also able to send commands to the HP via CK).
>
> However, I'm unable to upload/download any files (I'm trying to upload
> the NeoPolys library). All four of the upload/download options under
> the File menu in the connectivity kit are "greyed out" and not
> accessable. *confused* TIA

Once you are connected, you should see the contents of the calculator's
HOME directory in the right pane. Drag the NeoPolys file from elsewhere
(that is, another folder on your computer) and drop it in this pane.
This should transmit it to your calc.

After disconnecting, use the FILER (or other means -- I like Prof.
Rautenberg's Filer6 myself) to move the file to port 2, that is, FLASH.
Use ON-C to reboot the calc, and the library should attach
automatically. You should then be able to access it via RS-2, the LIB
menu. (Alternatively you could use << 1494 TMENU >>. I have that
little program stored in a MATH directory under HOME.)

Good luck.

PS. Also, note that for the ROM menu of the Connectivity Kit to be
enabled, you have to specify a USB connection instead of Auto Connect --
I mention this because it isn't obvious, and I needed to remember this
today to install a new ROM image...

--
Dave Boyd

--- In 50g@yahoogroups.com, Dave Boyd <boydda@...> wrote:

>
> Once you are connected, you should see the contents of the

calculator's

> HOME directory in the right pane. Drag the NeoPolys file from

elsewhere

> (that is, another folder on your computer) and drop it in this

pane.

> This should transmit it to your calc.
>
> After disconnecting, use the FILER (or other means -- I like Prof.
> Rautenberg's Filer6 myself) to move the file to port 2, that is,

FLASH.

> Use ON-C to reboot the calc, and the library should attach
> automatically. You should then be able to access it via RS-2, the

LIB

> menu. (Alternatively you could use << 1494 TMENU >>. I have that
> little program stored in a MATH directory under HOME.)
>
> Good luck.
>
> PS. Also, note that for the ROM menu of the Connectivity Kit to be
> enabled, you have to specify a USB connection instead of Auto

Connect --

> I mention this because it isn't obvious, and I needed to remember

this

> today to install a new ROM image...
>
> --
> Dave Boyd
>

Dave,
Thanks for the help. Worked great! I was able to get the Bode-Routh
lib installed, too. Now if I could only remember how to do that
stuff...
~Shawn