50g

I am a new user on the 50g. Old user other models before the 49+
series of calculators.

Using the link kit the instructions seem terse and I am entering a
trial and error mode of experimentation to make things work. Old hp 41
and hp71 series had seamless ways of saving programs to tape once
written but do not have the ability to write on pc and transfer to
calculator. However, the manuals and capabilities where clearly given
through examples of everything you needed to archive and restore from
tape. I know that this calculator has the capability to make transfers
form pc text to the calculator and I will eventually get there.

Here is a company that seems to have this under control and sales a CD
that will install its programs on the calculator from the CD using the
link kit. So I know that the capability must be within my grasp.

http://www.southforktech.com/sfttools.htm

Is there a good explanation of how to write programs on your PC and
how to transfer them efficiently to the calculator?

I have transferred a text file to the stack on the calculator then
edited it on the calculator replacing the double left and right
programming enunciators with HP enunciators but this is a tedious
process and seems I might as well write the programs on the calculator
in the first place.

Any ideas or help would be appreciated.

Best regards
Gordon Ayres

--- In 50g@yahoogroups.com, "Gordon Ayres" <gordon.ayres@...> wrote:

>
> I am a new user on the 50g. Old user other models before the 49+
> series of calculators.
>
> Using the link kit the instructions seem terse and I am entering a
> trial and error mode of experimentation to make things work. Old hp

41

> and hp71 series had seamless ways of saving programs to tape once
> written but do not have the ability to write on pc and transfer to
> calculator. However, the manuals and capabilities where clearly

given

> through examples of everything you needed to archive and restore

from

> tape. I know that this calculator has the capability to make

transfers

> form pc text to the calculator and I will eventually get there.
>
> Here is a company that seems to have this under control and sales a

CD

> that will install its programs on the calculator from the CD using

the

> link kit. So I know that the capability must be within my grasp.
>
> http://www.southforktech.com/sfttools.htm
>
> Is there a good explanation of how to write programs on your PC and
> how to transfer them efficiently to the calculator?
>
> I have transferred a text file to the stack on the calculator then
> edited it on the calculator replacing the double left and right
> programming enunciators with HP enunciators but this is a tedious
> process and seems I might as well write the programs on the

calculator

> in the first place.
>
> Any ideas or help would be appreciated.
>
> Best regards
> Gordon Ayres
>

I love using Debug4x from http://www.debug4x.com. It's a free IDE
that comes with an emulator (also available separately from
http://www.hpcalc.org) that you can test your programs on before
transferring to your physical device. Debug4x now includes User RPL
programming (was mainly used to create SysRPL libraries and assembler
code before the inclusion of User RPL--the "native" HP programming
structure).

Manjo (the author of the grayscale program OpenFire) has also created
a programming environment that's available here:
http://fly.srk.fer.hr/~manjo/openfire/

For detailed programming references, check out the HP49G+ Adanved
User's Guide, available at:
http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00554621/c005
54621.pdf

Also, the SysRPL programming guide is here:
http://www.hpcalc.org/details.php?id=5142

Enjoy,
Scott

thanks awsome information.

Best regards
Gordon

--- In 50g@yahoogroups.com, "Scott" <blueelectron@...> wrote:
>
> --- In 50g@yahoogroups.com, "Gordon Ayres" <gordon.ayres@> wrote:
> >
> > I am a new user on the 50g. Old user other models before the 49+
> > series of calculators.
> >
> > Using the link kit the instructions seem terse and I am entering a
> > trial and error mode of experimentation to make things work. Old hp
> 41
> > and hp71 series had seamless ways of saving programs to tape once
> > written but do not have the ability to write on pc and transfer to
> > calculator. However, the manuals and capabilities where clearly
> given
> > through examples of everything you needed to archive and restore
> from
> > tape. I know that this calculator has the capability to make
> transfers
> > form pc text to the calculator and I will eventually get there.
> >
> > Here is a company that seems to have this under control and sales a
> CD
> > that will install its programs on the calculator from the CD using
> the
> > link kit. So I know that the capability must be within my grasp.
> >
> > http://www.southforktech.com/sfttools.htm
> >
> > Is there a good explanation of how to write programs on your PC and
> > how to transfer them efficiently to the calculator?
> >
> > I have transferred a text file to the stack on the calculator then
> > edited it on the calculator replacing the double left and right
> > programming enunciators with HP enunciators but this is a tedious
> > process and seems I might as well write the programs on the
> calculator
> > in the first place.
> >
> > Any ideas or help would be appreciated.
> >
> > Best regards
> > Gordon Ayres
> >
>
> I love using Debug4x from http://www.debug4x.com. It's a free IDE
> that comes with an emulator (also available separately from
> http://www.hpcalc.org) that you can test your programs on before
> transferring to your physical device. Debug4x now includes User RPL
> programming (was mainly used to create SysRPL libraries and assembler
> code before the inclusion of User RPL--the "native" HP programming
> structure).
>
> Manjo (the author of the grayscale program OpenFire) has also created
> a programming environment that's available here:
> http://fly.srk.fer.hr/~manjo/openfire/
>
> For detailed programming references, check out the HP49G+ Adanved
> User's Guide, available at:
> http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00554621/c005
> 54621.pdf
>
> Also, the SysRPL programming guide is here:
> http://www.hpcalc.org/details.php?id=5142
>
> Enjoy,
> Scott
>

I have made my first pass through the debug program. I have not got a
good understanding how to work it yet but I will keep hacking at it.

thanks
Gordon

--- In 50g@yahoogroups.com, "Gordon Ayres" <gordon.ayres@...> wrote:
>
>
> thanks awsome information.
>
> Best regards
> Gordon
>
>
> --- In 50g@yahoogroups.com, "Scott" <blueelectron@> wrote:
> >
> > --- In 50g@yahoogroups.com, "Gordon Ayres" <gordon.ayres@> wrote:
> > >
> > > I am a new user on the 50g. Old user other models before the 49+
> > > series of calculators.
> > >
> > > Using the link kit the instructions seem terse and I am entering a
> > > trial and error mode of experimentation to make things work. Old hp
> > 41
> > > and hp71 series had seamless ways of saving programs to tape once
> > > written but do not have the ability to write on pc and transfer to
> > > calculator. However, the manuals and capabilities where clearly
> > given
> > > through examples of everything you needed to archive and restore
> > from
> > > tape. I know that this calculator has the capability to make
> > transfers
> > > form pc text to the calculator and I will eventually get there.
> > >
> > > Here is a company that seems to have this under control and sales a
> > CD
> > > that will install its programs on the calculator from the CD using
> > the
> > > link kit. So I know that the capability must be within my grasp.
> > >
> > > http://www.southforktech.com/sfttools.htm
> > >
> > > Is there a good explanation of how to write programs on your PC and
> > > how to transfer them efficiently to the calculator?
> > >
> > > I have transferred a text file to the stack on the calculator then
> > > edited it on the calculator replacing the double left and right
> > > programming enunciators with HP enunciators but this is a tedious
> > > process and seems I might as well write the programs on the
> > calculator
> > > in the first place.
> > >
> > > Any ideas or help would be appreciated.
> > >
> > > Best regards
> > > Gordon Ayres
> > >
> >
> > I love using Debug4x from http://www.debug4x.com. It's a free IDE
> > that comes with an emulator (also available separately from
> > http://www.hpcalc.org) that you can test your programs on before
> > transferring to your physical device. Debug4x now includes User RPL
> > programming (was mainly used to create SysRPL libraries and assembler
> > code before the inclusion of User RPL--the "native" HP programming
> > structure).
> >
> > Manjo (the author of the grayscale program OpenFire) has also created
> > a programming environment that's available here:
> > http://fly.srk.fer.hr/~manjo/openfire/
> >
> > For detailed programming references, check out the HP49G+ Adanved
> > User's Guide, available at:
> > http://h20000.www2.hp.com/bc/docs/support/SupportManual/c00554621/c005
> > 54621.pdf
> >
> > Also, the SysRPL programming guide is here:
> > http://www.hpcalc.org/details.php?id=5142
> >
> > Enjoy,
> > Scott
> >
>