50g

OK, I followed those instructions
The only graphic I then see are small x,y,z arrows extending from a
common origin.
Is there supposed to be something else?
Thanks,
Steve

--- In 50g@yahoogroups.com, "Juan C." <jcbuchin@...> wrote:
>
> Hello J, just press [Left] [2D/3D] remember that if you are in RPN you
> have hold [Left] and press [2D/3D]
> The type of plot is highlighted, if fast3D is not selected, press
> CHOOS in the soft menu, you can use the up and down arrows to select
> fast3D or just press and hold [ALPHA] and press [F] and then press
> [ENTER] or OK in the soft menu.
> Now press the down arrow to go to EQ where you are going to enter the
> equation to plot, press the single quote mark, you will notice that the
> soft menu now have X and Y to help you enter the equation,
> enter 'X^2+Y^2' and press [ENTER] or OK in the soft menu
> You are ready to plot the graphic press DRAW in the soft menu, when the
> graphic comes, play with the arrows to see the graphic in different
> positions.
>