50g

Add these to the wiki site on the links page!

--- In 50g@yahoogroups.com, "John Dearing" <JSDearing@...> wrote:
>
> 50g TIPS
>
> Please submit yours to share! --John
>
>
>
--------------------------------------------------------------------------------
>
>
> ABBREVIATIONS USED: PLUS: The “+” symbol, when shown between two
keys without spaces or commas, means press and hold the first key,
press and release the second key, then release the first key. LS =
Left Shift key. RS = Right Shift key. ◄ ► ▲ ▼ = the cursor
control keys. STO = STO► [the STORE key].
>
>
>
>
>
> TO GET THE “UPDATE CODE” PROMPT TO UPDATE ROM WITHOUT USING
PAPERCLIP: Press ON+F6 [press and hold ON, press and release F6,
release ON]; wait about 3 seconds for a menu of options; press and
release ON, then immediately press and hold both the + and the â€"
keys for 2-3 seconds; release both keys, see “1. UPDATE CODE 2.
SELFTEST”; press 1 to update ROM without having to use a paperclip
in the reset hole. To cancel, press 2 to start the selftest, then
cancel that with ON+F3.
>
>
>
> "HOLDED" KEY COMBINATIONS: On the 50g, if you press Left Shift [or
Right Shift] and release, then press another key, that key press
combination is different than if you press Left Shift [or Right Shift]
and hold it while you press the next key. The rc.p keycode (row column
. plane) for the held keys is now rc.ph (where h is 1 for held key and
0 for non-held key).
>
>
>
> EXACT & APPROXIMATE MODE TOGGLE: RS+ENTER.
>
>
>
> REAL & COMPLEX MODE TOGGLE: LS+TOOL.
>
>
>
> PUT BACK TICKS ON THE STACK: If you right-shift (hold) the EQW key
('), you will put back ticks on the stack which will use the Algebraic
compiler to parse your command while in RPN mode.
>
>
>
> TO LIST CONTENTS OF ALL VARIABLES IN SCREEN: Press RS, ▼ [Right
Shift, Cursor Down]. Press ON to cancel.
>
>
>
> UNIT CONVERSIONS MADE EASY: Unit conversions like yd^3â†'m^3 can be
keystroke-intensive. To make it easy, have flag 117 (Soft MENU)
checked, and RPN mode selected. Example: convert 100 yd^3 to m^3:
press RS, UNITS, VOL, type ‘100’, yd^3 [see “100_yd^3”], LS,
m^3. See “76.4554857984_m3”. You only have to use CONVERT if you
have some units that aren’t on the menus, like ‘qt/hr’. Even
then, you can store that unit in a variable, and make a custom menu
with it (along with the units you regularly use). Then this method
(with LS, the left-shift key) works the same way.
>
>
>
> FRACTIONAL EXPONENTS: Why do I get a complex number when I evaluate
'(-1)^(2/3)'? Because the machine returns a complex principal solution
for expressions with fractional exponents. To get a real-valued result
to the above, use the x√y key: 'XROOT(3,(-1)^2)' or 'XROOT(3,SQ(-1))'.
>
>
>
> STORE VARIABLES: Example: Store 'π*r2' in variable A1:
>
> ALG: 'π*r^2 ► STO A1 ENTER
>
> RPN Method 1: π r ENTER 2 yx * A1 STO
>
> RPN Method 2a: 'π*r^2 ► A1 STO
>
> RPN Method 2b: 'π*r^2 ENTER A1 STO
>
>
>
> PURGE VARIABLES:
>
> ALG: TOOL PURGE VAR [press variable softkey] ENTER
>
> RPN Method 1: VAR ' [press variable softkey] ENTER TOOL PURGE
>
> RPN Method 2: VAR { [press one or more variable softkeys] ENTER
TOOL PURGE
>