Hold right-shift then ENTER (Toggles Exact and Approximate mode.)
-----Original Message-----
From: 50g@yahoogroups.com
[mailto:50g@yahoogroups.com] On Behalf Of Nancy
Von Essen
Sent: Monday,
February 26, 2007 3:41 PM
To: 50g@yahoogroups.com
Subject: Re: [50g] divide
Hi Gordon: Ed Von Essen here. One last way to set approximate mode.
Press the MODE key, then press F3 soft key ( CAS ) , move the highlight bar down to _Approx. and finally press the F3 soft key ( CHK ). One might also have Numeric checked. Have fun learning how to use the 50G. It's really amazing what you can do.
Best regards Ed
Gordon Ayres
<gordon.ayres@ angledetailing. com> wrote:
funny thing
I have claculator mode RPN set.
When i do rpn operation for * + or - works as expected. When I divide
a number like 3 by 2 it shows 3/2 in the stack and does not return 1.5
as expected?
any help apreciated.
Best regards
Gordon